Sony 3-294-663-11(2) Mode d'emploi - Page 2
Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Sony 3-294-663-11(2). Sony 3-294-663-11(2) 2 pages. Sony mini hi-fi component system operating instructions
Imprimer la pageOther Operations
Using the timers
The system offers two timer functions. If you use both
timers, the Sleep Timer has priority.
Creating your own CD program
Use buttons on the remote to use the timer functions.
(Program Play)
Sleep Timer:
Use buttons on the remote to create your own program.
You can fall asleep to music. This function works even if
the clock is not set.
1
Press FUNCTION +/ (or FUNCTION on the unit)
Press SLEEP
repeatedly. If you select "AUTO, " the
repeatedly to select the CD function.
system automatically turns off after the current disc stops
2
Press PLAY MODE
repeatedly until "PGM" appears
or in 100 minutes.
while the player is stopped.
Play Timer:
3
Press DISC SKIP
to select a disc.
You can wake up to CD or tuner at a preset time.
4
Press / (or / on the unit)
Make sure you have set the clock.
repeatedly until the desired track number appears.
1
When programming MP3 files, press
+/
Prepare the sound source.
repeatedly to select the desired folder, and then select
Press VOLUME +/ (or turn VOLUME on the unit)
the desired file.
to adjust the volume.
To start from a specific CD track or MP3 file, create
Selected track or file number
your own CD program.
2
Press TIMER MENU
.
3
Press /
repeatedly to select "PLAY SET, " then
press
.
"ON TIME" appears, and the hour indication flashes.
Total playing time of the
4
Set the time to start playback.
selected track
Press /
repeatedly to set the hour, then press
5
.
Press
to add the track or file to the program.
The minute indication flashes. Use the procedure
6
Repeat steps 3 through 5 to program additional
above to set the minutes.
tracks or files, up to a total of 25 tracks or files.
5
Use the same procedure as in step 4 to set the time
7
To play your program of tracks or files, press
.
to stop playback.
The program remains available until you open the disc
6
Select the sound source.
tray. To play the same program again, select the CD
function, and then press
Press /
repeatedly until the sound source you
.
want appears, and then press
To cancel Program Play
shows the timer settings.
Press PLAY MODE
repeatedly until "PGM"
7
Press
to turn off the system.
disappears while the player is stopped.
If the system is on at the preset time, the Play Timer
To delete the last track or file of the program
will not play.
Press CLEAR
while the player is stopped.
To activate or check the timer again
To view program information, such as total
1
Press TIMER MENU
.
track number of the program
"SELECT" flashes.
Press DISPLAY
repeatedly.
2
Press
.
3
Press /
repeatedly to select "PLAY SEL, " and
Presetting radio stations
then press
.
To cancel the timer
You can preset your favorite radio stations and tune
Repeat the same procedure as above until "OFF" appears
them in instantly by selecting the corresponding preset
in step 3, and then press
.
number.
1
Tune in the desired station (See "Listening to the
To change the setting
radio").
Start over from step 1.
2
Press TUNER MEMORY
.
Tip
Preset number
The Play Timer setting remains as long as the setting is not canceled
manually.
3
Press +/ (or TUNING +/ on the unit)
repeatedly to select your desired preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4
Press
.
5
Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6
To call up a preset radio station, press TUNING
MODE
repeatedly until "PRESET" appears, and
then press +/ (or TUNING +/ on the unit)
repeatedly to select the desired preset number.
To change the AM tuning interval
Troubleshooting
The AM tuning interval is factory-preset to 9 kHz or
10 kHz.
Use buttons on the unit to change the AM tuning
1
Make sure the power cord and speaker cords are
interval.
correctly and firmly connected.
1
Tune in any AM station, and then turn off the
2
Find your problem in the checklist below, and take
system.
the indicated corrective action.
2
Press DISPLAY
If the issue persists, contact your nearest Sony dealer.
3
While holding down TUNING +
If "PROTECT" appears on the display
All the AM preset stations are erased. To reset the
interval to the factory preset, repeat the procedure.
Immediately unplug the power cord, and check the
following items after "PROTECT" disappears.
To improve tuner reception
Are the + and speaker cords short-circuited?
Is anything blocking the ventilation holes on the top
Turn off CD player power by using the CD power
or back of the system?
management function. By default, CD power is turned
After you have checked these above items and found
on.
to be all right, reconnect the power cord, and turn on
1
Press FUNCTION +/ (or FUNCTION on the unit)
the system. If the issue persists, contact your nearest
repeatedly to select the CD function.
Sony dealer.
2
Press
3
After "STANDBY" stops flashing, press DISPLAY
General
to display the clock, and then press
holding down
The system does not turn on.
"CD POWER OFF" appears. With CD player power
Is the power cord plugged in?
turned off, disc access time is increased. To turn on
CD player power, repeat the procedure until "CD
There is no sound.
POWER ON" appears.
Are the + and speaker cords short-circuited?
Are you using only the supplied speakers?
To reset the system to factory settings
Is anything blocking the ventilation holes on the top or
If the system still does not operate properly, reset the
back of the system?
system to factory settings.
Sound comes from one channel, or the left and
Use buttons on the unit to reset the unit to its factory
right volumes are unbalanced.
default settings.
Place the speakers as symmetrically as possible.
1
Disconnect and reconnect the power cord, and then
Connect only the supplied speakers.
turn on the system.
2
Press
Severe hum or noise.
. The display
time.
Move the system away from sources of noise.
All user-configured settings, such as preset radio
Connect the system to a different wall socket.
stations, timer, and the clock, are deleted.
Install a noise filter (available separately) to the power
cord.
The remote does not function.
Messages
Remove any obstacles between the remote and the
remote sensor
on the unit, and position the unit
away from fluorescent lights.
CANNOT LOCK : The system cannot be locked after
Point the remote at the system's sensor.
you have done the procedure of "When carrying this
Move the remote closer to the system.
system. "
COMPLETE : The preset operation ended normally.
CD/MP3 player
FULL : You tried to program more than 25 tracks or files
(steps).
The sound skips, or the disc will not play.
LOCKED : The disc tray does not open. Contact your
Wipe the disc clean, and replace it.
nearest Sony dealer.
Move the system to a location away from vibration (for
NO DISC : There is no disc in the player, or you have
example, on top of a stable stand).
loaded a disc that cannot be played.
Move the speakers away from the system, or place them
NO STEP : All of the programmed tracks have been
on separate stands. At high volume, speaker vibration
erased.
may cause the sound to skip.
OVER : You have reached the end of the disc while
pressing
Play does not start from the first track.
PUSH STOP : You pressed PLAY MODE
Return to Normal Play by pressing PLAY MODE
playback.
repeatedly until both "PGM" and "SHUF" disappear.
PROTECT : The following causes can be considered:
Starting playback takes more time than usual.
S peaker cords may be short-circuited.
Th e ventilation holes may be blocked.
The following discs take a longer time to start playback.
See "If "PROTECT" appears on the display" to check
a disc recorded with a complicated tree structure.
what to do if this message appears.
a disc recorded in multisession mode.
READING : The system is reading information from the
a disc that has not been finalized (a disc to which data
disc. Some buttons are not available.
can be added).
TIME NG : The Play Timer start and end times are set to
a disc that has many folders.
the same time.
The disc tray does not open and "LOCKED"
appears.
Contact your Sony dealer or local authorized Sony
service facility.
Tuner
Severe hum or noise, or stations cannot be
received. ("TUNED" or "ST" flashes on the
display.)
Connect the antenna properly.
Find a location and an orientation that provide good
reception, and then set up the antenna again.
Keep the antennas away from the speaker cords and the
power cord to avoid picking up noise.
Turn off nearby electrical equipment.
Precautions
Discs that this system CAN play
Audio CD
CD-R/CD-RW (audio data/MP3 files)
Discs that this system CANNOT play
to display the clock.
CD-ROM
, press
.
CD-R/CD-RW other than those recorded in music CD
format or MP3 format conforming to ISO9660 Level 1/
Level 2, Joliet
CD-R/CD-RW recorded in multisession that have not
ended by "closing the session"
CD-R/CD-RW of poor recording quality, CD-R/
CD-RW that have scratches or are dirty, or CD-R/CD-
RW recorded with an incompatible recording device
CD-R/CD-RW which is finalized incorrectly
Discs containing files other than MPEG 1 Audio
Layer-3 (MP3) files
to turn off the system.
Discs of non-standard shape (for example, heart,
square, star)
while
Discs that have adhesive tape, paper, or sticker attached
.
to them
Rental or used discs with attached seals where the glue
extends beyond the seal
Discs that have labels printed using ink that feels tacky
when touched
Notes on discs
Before playing, wipe the disc with a cleaning cloth from
the center out to the edge.
Do not clean discs with solvents, such as benzine
thinner, or commercially available cleaners or anti-
static spray intended for vinyl LPs.
Do not expose discs to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
, FUNCTION
, and
at the same
direct sunlight.
On safety
The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet,
even if the unit itself has been turned off.
Completely disconnect the power cord (mains lead)
from the wall socket (mains) if it is not going to be used
for an extended period of time. When unplugging the
unit, always grip the plug. Never pull the cord itself.
Should any solid object or liquid get into the system,
unplug the system, and have it checked by qualified
personnel before operating it again.
AC power cord must be changed only at the qualified
service shop.
On placement
Do not place the system in an inclined position or in
locations that are extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
Be careful when placing the unit or speakers on
surfaces that have been specially treated (for example,
with wax, oil, polish) as staining or discoloration of the
during playback or pause.
surface may result.
during
If the system is brought directly from a cold to a warm
location or is placed in a very damp room, moisture
may condense on the lens inside the CD player, and
cause the system to malfunction. In this situation,
remove the disc, and leave the system turned on for
about an hour until the moisture evaporates.
On heat buildup
Heat buildup on the unit during operation is normal
and is not cause for alarm.
Do not touch the cabinet if it has been used
continuously at a high volume because the cabinet may
have become hot.
Do not obstruct the ventilation holes.
On the speaker system
This speaker system is not magnetically shielded, and
the picture on nearby TV sets may become magnetically
distorted. In this situation, turn off the TV, wait 15 to 30
minutes, and turn it back on.
If there is no improvement, move the speakers far away
from the TV.
Cleaning the cabinet
Clean this system with a soft cloth slightly moistened
with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
Specifications
Main unit
Amplifier section
MHC-EC98P
The following are measured at AC 240V, 50/60Hz
Front Speaker
Power output (rated):
Low channel
55 W + 55 W (at 8 Ω, 1 kHz, 1% THD)
High channel
55 W + 55 W (at 8 Ω, 8 kHz, 1% THD)
RMS output power (reference):
Low channel
75 W + 75 W (per channel at 8 Ω, 1 kHz, 10% THD)
High channel
75 W + 75 W (per channel at 8 Ω, 8 kHz, 10% THD)
Subwoofer
RMS output power (reference):
130 W (at 4 Ω, 80 Hz, 10% THD)
MHC-EC78Pi
Power output (rated):
Low channel
50 W + 50 W (at 8 Ω, 1 kHz, 1% THD)
High channel
50 W + 50 W (at 8 Ω, 8 kHz, 1% THD)
RMS output power (reference):
Low channel
70 W + 70 W (per channel at 8 Ω, 1 kHz, 10% THD)
High channel
70 W + 70 W (per channel at 8 Ω, 8 kHz, 10% THD)
Inputs
AUDIO IN (stereo mini jack): Sensitivity 800 mV, impedance 22 kilohms
Outputs
PHONES (stereo mini jack): Accepts headphones with an impedance of 8 Ω
or more
SPEAKER: impedance
8 Ω
SUBWOOFER OUT (MHC-EC98P only): impedance
4 Ω
CD player section
System: Compact disc and digital audio system
Laser: Semiconductor laser (
=770 810 nm)
Emission duration: continuous
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 88 dB
Tuner section
FM stereo, FM/AM superheterodyne tuner
Antenna:
FM lead antenna
AM loop antenna
FM tuner section:
Tuning range: 87.5 108.0 MHz (50 kHz step)
Intermediate frequency: 10.7 MHz
AM tuner section:
Tuning range
Australian model:
531 1,710 kHz (with 9 kHz tuning interval)
530 1,710 kHz (with 10 kHz tuning interval)
The UK model:
531 1,602 kHz (with 9 kHz tuning interval)
Intermediate frequency: 450 kHz
Speaker
Front Speaker (SS-EC78S) for MHC-EC98P/EC78Pi
Speaker system: 3 way 3 Drivers speaker system, Bass reflex
Speaker unit
Subwoofer: 13 cm, cone type
Woofer: 13 cm, cone type
Tweeter: 4 cm, horn type
Rated impedance
High frequency: 8 ohms
Low frequency: 8 ohms
Dimensions (Approx.): 220 × 350 × 220 mm (w/h/d)
Mass (Approx.): 3.5 kg
Subwoofer (SS-WG98S) for MHC-EC98P only
Speaker system: Subwoofer speaker system, Bass reflex
Speaker unit
Subwoofer: 20 cm, cone type
Rated impedance: 4 ohms
Dimensions (Approx.): 280 × 306 × 310 mm (w/h/d)
Mass (Approx.): 5.6 kg
General
Power requirements:
Australian model: AC 230 240 V, 50/60 Hz
The UK model: AC 230 V, 50/60 Hz
Power consumption:
MHC-EC98P
220 W
MHC-EC78Pi
160 W
0.5 W (in Power Saving Mode)
Dimensions (w/h/d) (excl. speakers):
MHC-EC98P
Approx. 200 × 306 × 430 mm
MHC-EC78Pi
Approx. 200 × 306 × 415 mm
Mass (excl. speakers):
MHC-EC98P
Approx. 7.0 kg
MHC-EC78Pi
Approx. 6.1 kg
Supplied accessories: Remote Commander (1)/R6 (Size AA) batteries (2)/FM
lead/AM loop antenna (1)/Speaker pads MHC-EC98P (8) and for SS-WG98
(Subwoofer) (4), MHC-EC78Pi (8)/TDM-iP10 (M) (MHC-EC78Pi only) (1)
Design and specifications are subject to change without notice.
Standby power consumption: 0.5 W
Halogenated flame retardants are not used in the
certain printed wiring boards.
Halogenated flame retardants are not used in cabinets.