Sony CMT-CP11 Manuel d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony CMT-CP11. Sony CMT-CP11 36 pages. Micro hifi component system
Également pour Sony CMT-CP11 : Manuel d'entretien (45 pages), Manuel d'utilisation (36 pages)
Imprimer la page
Step
3: Presetting
radio
stations
(continued)
To tune
in a weak
station
In step 3, press TUNING
MODE repeatedly
until
"AUTO"
and "PRESET"
disappear,
then press
TUNING
+/- repeatedly
to tune in the station.
To change
the preset
number
Start over from step 2.
Tip
The preset stations are saved in the system's memory
for about two days even if you disconnect the power
cord or a power failure occurs.
To change
the
AM
tuning
interval
(not applicable
on the
European
and
Middle
Eastern
models)
The AM tuning interval is factory-preset to 9 kHz (or
10 kHz on North American model). To switch the
AM tuning interval, tune in any AM station first, then
turn off the system. Pressing TUNING + down, turn
the system back on. When you change the interval, all
the AM preset stations are erased. To change back to
the original interval, tune in any AM station first, then
turn off the system. Pressing TUNING - down, tum
the system back on.
Connecting optional
components
This section explains how to connect a variety of
components
to your system in order to enhance it.
Refer to the instructions
included with each
component
for details.
Connecting audio components
Connecting
an MD deck
for
analog
recording
You can connect an MD deck to the system with
commercially
available audio cords. Be sure to
match the color-coded
pins to the appropriate
jacks. To listen to the MD deck after connecting
it,
press MD/VIDEO
until "MD" appears.
To the audio input jacks on the
MD deck
To the audio output jacks on the MD
deck
8