Sony CMT-HP7 - Executive Microsystem Manuel d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony CMT-HP7 - Executive Microsystem. Sony CMT-HP7 - Executive Microsystem 36 pages. Micro hi fi component system
Également pour Sony CMT-HP7 - Executive Microsystem : Manuel d'utilisation (36 pages)
Imprimer la page
3 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Refer to the print on your system's
VOLTAGE SELECTOR for available
settings.
4 Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
Inserting two R6 (size AA)
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
e
E
E
e
Attaching the speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the speakers
and prevent them from slipping.
Front speaker (Left (4)/Right (4))
When carrying this system
Perform the following procedure to protect
the CD mechanism.
1
Make sure that all discs are removed
from the system.
2
Press ?/1 to turn off the system.
"STANDBY" flashes for a few seconds,
and then disappears from the display.
3
Unplug the power cord.
GB
7