Argo Rose Tower Instructions d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation pour {nom_de_la_catégorie} Argo Rose Tower. Argo Rose Tower 8 pages.

d. TIMER BUTTON

When the appliance is operating, the operating time can be set by touching the TIMER button by 1h, 2h, 4h and 8h. The

unit will switch off automatically at the end of the programmed time.

SPEED BUTTON

Touching the button SPEED the fan speed increase from LOW to MEDIUM to HIGH.

HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES

Open the battery cover on the back of the remote control (press and pull the cover).

Place the batteries inside the cover, making sure the polarity is correct.

Slot the cover back into position on the remote control.

Use cells model no. CR2032 3V, compliant with Battery Directive no. 2006/66/EC.

Remove the batteries when not using the remote control for a long period of time.

INFORMATION FOR CORRECT DISPOSAL OF THE BATTERIES IN ACCORDANCE WITH EUROPEAN

DIRECTIVE 2006/66/EC

Please replace the battery when its electrical charge has been exhausted: at the end of its useful life, it must not

be disposed of together with unsorted waste. It must be must be delivered to appropriate separated waste

disposal plants or to dealers that provide a similar service. Separate waste disposal of batteries prevents

potential negative effects on the environment and human health resulting from inadequate disposal, and also

allows the materials from which it is made to be recovered and recycled in order to achieve significant savings in

terms of energy and resources. The separate disposal obligation is underlined by the crossed-out dustbin

symbol appearing on the battery. Illegal disposal of the product by the user shall result in the application of

of administrative sanctions as defined by current regulations.

ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE.

Cleaning the outside surface of the appliance

Turn the switch off and unplug before carrying out any maintenance work or moving the appliance.

Use a soft cloth to remove any dust from the fan. If the fan is excessively dirty, use a soft cloth moistened with water and

a mild detergent at a temperature lower than 50°C. Let the fan dry completely before use.

or solvents such as petrol. Do not wash the appliance with water.

clean that may damage the surface.

Cleaning the internal fan of the appliance

To extract and clean the fan follow the steps below:

Press on the "PUSH" button and remove the rear grille (Picture 1)

Unscrew counter clockwise and lift the base of the fan (Picture 2)

Clean with a cloth or immerse the fan directly in water.

Dry the fan before putting it back in position

Insert the fan back into the product and screw the base clockwise.

Replace the rear grille (Picture 3)

V 01/18

DISASSEMBLY, MAINTENANCE AND STORAGE

Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.

Picture 1

Do not use oils, chemical substances or other items to

Picture 2

Do not use corrosive detergents

Picture 3