Cisco ASA 5506-X Montage du châssis - Page 6

Parcourez en ligne ou téléchargez le pdf Montage du châssis pour {nom_de_la_catégorie} Cisco ASA 5506-X. Cisco ASA 5506-X 10 pages. Threat defense reimage guide
Également pour Cisco ASA 5506-X : Manuel de démarrage rapide (10 pages), Manuel de démarrage rapide (14 pages), Manuel d'installation facile (11 pages), Manuel du logiciel (37 pages), Monter et connecter (12 pages), Manuel d'installation (46 pages), Manuel d'installation du matériel (26 pages)

Imprimer la page
Cisco ASA 5506-X Montage du châssis
Rack-Mount the Chassis
Figure 4: Install the Power Supply in the Rack Shelf
Velcro straps for power supply
1
3
Power supply stop
5
Rear sliding stop and screw (one of two screws on the
sliding stop)
a) Loosen the Velcro straps and place the power supply on the rack shelf behind the chassis.
Make sure the AC inlet cord faces the rear.
b) Align the power supply to the side and rear stops.
If the rear sliding stop is not touching the power supply, loosen the two screws, slide the stop up to touch the power
supply, and then retighten screws.
c) Re-engage the Velcro straps and tighten them to secure the power supply.
Mount the Chassis
6
Velcro straps for power supply
2
4
Power supply stop
—
Mount the Chassis