Sony MEX-BT3100P Manuel d'utilisation - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MEX-BT3100P. Sony MEX-BT3100P 50 pages. Bluetooth audio system
Également pour Sony MEX-BT3100P : Spécifications (6 pages)

Imprimer la page

G:\#sagyou\0613\4427433111\4427433111MEXBT3100PUC\01GB-

MEXBT3100PUC\040CD.fm

000COV.book Page 22 Wednesday, June 13, 2012 9:30 PM

Pairing

The Bluetooth device (cellular phone, audio

device, etc.) and this unit need to be

"paired" before use between each other via

the Bluetooth function.

Tips

• For details on pairing for a Bluetooth device,

refer to the operating instructions supplied with

the device.

• You can pair up to 9 Bluetooth devices with this

unit.

Place the Bluetooth device within 1 m

(3 ft) of this unit.

Press  and rotate the control

dial until "PAIRING" appears, then

press it.

The unit enters pairing standby mode.

Set the Bluetooth device to search for

this unit.

A list of detected devices appears in the

display of the device to be connected.

This unit is displayed as "Sony

Automotive" on the device to be

connected.

If passkey* input is required in the

display of the device to be connected,

input "0000."

If the device supports Bluetooth version

2.1, passkey input is not required.

* Passkey may be called "passcode," "PIN

code," "PIN number" or "Password," etc.,

depending on the device.

This unit and the Bluetooth device

memorize each other's information, and

when pairing is made,

The unit is ready for connection to the

device.

Note

If "

" continues to flash, the Bluetooth

device may not be compatible with this unit.

For details on compatible devices, visit the

support site on the back cover.

Select this unit on the Bluetooth device

to be connected.

Flashing

" " or " " appears when the

connection is made.

Notes

• While connecting to a Bluetooth device, this

unit cannot be detected from another device.

To enable detection, enter the pairing mode and

search for this unit from another device.

• It may take time to search or connect.

• Depending on the device, the confirmation

display of the connection appears before

inputting the passkey.

• The time limit for inputting the passkey differs

depending on the device. If the time expires,

perform the pairing procedure from the

beginning again.

• This unit cannot be connected to a device that

supports only HSP (Head Set Profile).

masterpage:Left

Input passkey

"0000"

stays lit.

MEX-BT3100P

4-427-433-11(1)