Sony MEX-BT3800U - Bluetooth Audio System Manuel d'utilisation - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MEX-BT3800U - Bluetooth Audio System. Sony MEX-BT3800U - Bluetooth Audio System 44 pages. Bluetooth audio system
Également pour Sony MEX-BT3800U - Bluetooth Audio System : Installation/Connexions (2 pages), Garantie limitée (1 pages), Installation/Connexions (2 pages), Fiche technique (2 pages), Manuel d'entretien (50 pages)
Imprimer la page
,w:mrw
Searching a track by listening to
track passages - ZAPPINTM
While playing back short track passages in a CD
or USB device in sequence, you can search for a
track you want to listen to.
ZAPPIN mode is suitable for searching for a
track in shuffle or shuffle repeat mode.
Select button
ZAP
1
Press
(ZAP)
during playback.
After "ZAPPIN" appears in the display,
playback starts from a passage of the next
track.
The passage is played for the set time, then a
click sounds and the next passage starts.
•
Track
._____-"TT'::,........._-~_r=_
._____-__rr=__ _
~
Y
t---
The part of each track to
playback in ZAPPIN mode.
2
Press the select button or
(ZAP)
when
a track you want to listen is played
back.
The track that you select returns to normal
play mode from the beginning.
To search a track by ZAPPIN mode again,
repeat steps I and 2.
Tips
• You can select the playback time from about 6
seconds/9 seconds/3D seconds (page
26).
You
cannot select the passage of the track to playback.
• Press
(SEEK)
+/-
or
CD/®
(ALBM
-/+)
in ZAPPIN
mode to skip a track
or
album.
16
Radio
Storing and receiving stations
Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically -
BTM
1
Press
(SOURCE/OFF)
repeatedly until
"TUNER" appears.
To change the band, press
(MODE)
repeatedly. You can select from FMl, FM2,
FM3, AMI or AM2.
2
Press and hold the select button.
The setup display appears.
3
Press the select button repeatedly
until "BTM" appears.
4
Press
(SEEK)
+.
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.
Storing manually
1
While receiving the station that you
want to store, press and hold a
number button (CD to ®) until
"MEM" appears.
Note
If you try to store another station on the same number
button, the previously stored station will be replaced.
Receiving the stored stations
1
Select the band, then press a number
button (CD to
®).
Tuning automatically
1
Select the band, then press
(SEEK)
+/-
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If
you know the frequency of the station you want to
listen to, press and hold (
SEEK)
+/-
to locate the
approximate frequency, then press (
SEEK)
+/-
repeatedly to fine adjust to the desired frequency
(manual tuning).