Sony MEX-N5000BT Manuel d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MEX-N5000BT. Sony MEX-N5000BT 40 pages. Bluetooth audio system
Également pour Sony MEX-N5000BT : Manuel d'utilisation (32 pages), Installation (2 pages)
Imprimer la page
3
Rotate the control dial to set the hour
and minute.
To move the digital indication, press SEEK+/-.
4
After setting the minute, press MENU.
The setup is complete and the clock starts.
To display the clock, press DSPL.
Preparing a BLUETOOTH Device
You can enjoy music, or perform handsfree calling,
by connecting a suitable BLUETOOTH device. For
details on connecting, refer to the operating
instructions supplied with the device.
Before connecting the device, turn down the
volume of this unit; otherwise, loud sound may
result.
When connecting a BLUETOOTH device (cellular
phone, audio device, etc.) for the first time, mutual
registration (called "pairing") is required. Pairing
enables this unit and other devices to recognize
each other.
1
Place the BLUETOOTH device within 1 m
{3 ft} of this unit.
2
Press CALL, rotate the control dial to
select [PAIRING], then press it.
0
flashes.
The unit enters pairing standby mode.
3
Perform pairing on the BLUETOOTH
device so it detects this unit.
4
Select [Sony Car Audio] shown in the
display of the BLUETOOTH device.
If [Sony Car Audio] does not appear, repeat from
step 2.
o Q =
DR-BT30Q
t
I
Sony
J4i-
Car Audio
xxxxxxx
5
If passkey* input is required on the
BLUETOOTH device, input [0000].
* Passkey may be called "Passcode," "PIN code,"
"PIN number" or."Password," etc., depending on
the device.
o Q =
I
.....
I
xxxx-
Input passkey
[0000]
When pairing is made,
0
stays lit.
6
Select this unit on the BLUETOOTH device
to establish the BLUETOOTH connection.
~" or
r]"
lights up when the connection is
made.
Note
While connecting to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
To cancel pairing
Perform step 2 to cancel the pairing mode after this
unit and the BLUETOOTH device are paired.
To use a paired device, connection with this unit is
required. Some paired devices will connect
automatically.
))
1
Press CALL, rotate the control dial to
select [BT SIGNL], then press it.
Make sure that
0
lights up.
2
Activate the BLUETOOTH function on the
BLUETOOTH device.
3
Operate the BLUETOOTH device to
connect to this unit.
~" or
r]"
lights up.
Icons in the display:
~"
Lights up when a cellular phone is
connected to the unit.
r]"
Lights up when an audio device is
connected to the unit.
Indicates the signal strength status of
T.ll
connected cellular phone.