Sony MEX-N5100BT Manuel d'utilisation - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MEX-N5100BT. Sony MEX-N5100BT 38 pages. Bluetooth audio system
Également pour Sony MEX-N5100BT : Manuel d'utilisation (42 pages)

Imprimer la page

F:\0918\4548379111\4548379111MEXN5100BTUC\01GB-MEXN5100BTUC\040CD.fm

010COV.book Page 19 Thursday, September 18, 2014 10:49 AM

AUTO OFF

Shuts off automatically after a desired time

when the unit is turned off: [NO], [30S] (30

seconds), [30M] (30 minutes), [60M] (60

minutes).

STEERING

Registers/resets the setting of the steering

wheel remote.

(Available when connected with the connection

cable RC-SR1 (not supplied).) (Available only

while the source is off and the clock is

displayed.)

STR EDIT

Registers the functions (SOURCE, ATT, VOL+/–,

SEEK+/–, VOICE, CALL) to the steering wheel

remote:

 Rotate the control dial to select the function

you want to assign to the steering wheel

remote, then press it.

 While [REGISTER] is blinking, press and hold

the button on the steering wheel remote you

want to assign the function to. When

registration is complete, [REGISTERED] is

displayed.

 To register other functions, repeat steps 

and .

STR RESET

Resets the setting of the steering wheel remote:

[YES], [NO].

Note

 While making settings, only button operation on

the unit is available. For safety, park your car

before making this setting.

 If an error occurs while registering, all the

registered information is cleared. Restart

registration from the beginning.

 This function may not be available on some

vehicles. For details on the compatibility of your

vehicle, visit the support site on the back cover.

AUX-A (AUX audio)

Activates the AUX source display: [ON], [OFF].

(Available only while the source is off and the

clock is displayed.)

REAR/SUB (MEX-N4100BT only)

Switches the audio output: [SUB-OUT]

(subwoofer), [REAR-OUT] (power amplifier).

(Available only while the source is off and the

clock is displayed.)

CT (clock time)

Activates the CT function: [ON], [OFF].

BTM (page 10)

(Available only when the tuner is selected.)

PARENTAL (MEX-N5100BT only)

Sets the parental lock to [ON], [OFF], and edits

the passcode (page 11). (Available only when the

SiriusXM is selected.)

SXM RESET (SiriusXM reset) (MEX-N5100BT only)

Initializes the SiriusXM Connect Vehicle Tuner

settings (preset channels/parental lock): [ON],

[OFF].

FIRMWARE

Checks/updates the firmware version. For

details, visit the following support site:

http://esupport.sony.com/

FW VERSION

Displays current firmware version.

FW UPDATE

Enters firmware update process: [YES], [NO].

(Available only while the source is off and the

clock is displayed.)

Sound Setup (SOUND)

This setup menu is available when any source

except for the BT phone is selected.

MEGABASS (mega bass)

Reinforces bass sound in synchronization with

the volume level: [ON], [OFF].

(Automatically sets to [OFF] when [C.AUDIO+] is

set to [ON].)

C.AUDIO+ (ClearAudio+)

Reproduces sound by optimizing the digital

signal with the Sony recommended sound

settings: [ON], [OFF].

(Automatically sets to [OFF] when [EQ10 PRESET]

is changed and/or [MEGABASS] is set to [ON].)

EQ10 PRESET

Selects an equalizer curve from 10 equalizer

curves or off: [OFF], [R AND B], [ROCK], [POP],

[DANCE], [HIP-HOP], [ELECTRONICA], [JAZZ],

[SOUL], [COUNTRY], [CUSTOM].

The equalizer curve setting can be memorized

for each source.

EQ10 SETTING

Sets [CUSTOM] of EQ10.

BASE

Selects a preset equalizer curve as a basis for

further customizing: [BAND1] 32 Hz, [BAND2] 63

Hz, [BAND3] 125 Hz, [BAND4] 250 Hz, [BAND5]

500 Hz, [BAND6] 1 kHz, [BAND7] 2 kHz, [BAND8]

4 kHz, [BAND9] 8 kHz, [BAND10] 16 kHz.

The volume level is adjustable in 1 dB steps,

from -6 dB to +6 dB.

POSITION (listening position)

MEX-N5100BT/MEX-N4100BT

masterpage: Right

4-548-379-11(1)