Sony MHC-EX5 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-EX5. Sony MHC-EX5 29 pages.

Imprimer la page

eee

See. 2 ae

eG]

inserting the

Batteries

Install two R6 (size AA) batteries in the

supplied remote for remote control.

1 Slide the lid to remove it.

"Na

2 Insert two R6 (size AA) batteries.

Match the + and — to the diagram in the

battery compartment.

3 Slide the lid to replace it.

Battery life

You can expect the remote to operate for

about six months (using Sony SUM-3 (NS)

batteries) before the batteries run down.

When the batteries no longer operate the

remote, replace all the batteries with new

ones.

To avoid battery leakage

If you are not going to use the remote for a

long time, remove the batteries to avoid

damage caused by corrosion from battery

leakage.

Chapter 1: Setting Up

Setting the Clock

The built-in clock shows the time in the

display even if the power is off.

Use the buttons on the unit to do this

operation.

ENTER/NEXT

MULTI CONTROLLER

indicator

1 Press CLOCK SET.

The MULTI CONTROLLER indicator,

ENTER/NEXT indicator and the hour

indication begin flashing.

vig .-

<LELL

flashing

2 Set the current hour by turning MULTI

CONTROLLER (+/-) until the correct

hour appears.

<FSL

flashing

3 Press ENTER/NEXT.

The minutes indication begins flashing.

flashing

4 set the current minute by turning

MULTI CONTROLLER (+/—) until the

correct minute appears.

flashing

5 Press ENTER/NEXT.

The clock starts running and the upper

dot flashes.

The upper dot flashes for the first half of

a minute (0 to 29 seconds), and the lower

dot flashes for the last half of a minute

(30 to 59 seconds).

Use the time signal to set the clock

accurately.

flashing

To correct the clock setting

Repeat steps 1 to 5.