Sony MHC-EX660 Manuel d'utilisation - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-EX660. Sony MHC-EX660 28 pages.

Imprimer la page

Disc player

Playback does not start.

• Wipe the disc clean (page 24).

• Reload the disc.

• Load the disc that this system can play

back (page 19).

• Remove the disc and wipe away the

moisture on the disc, then leave the

system turned on for a few hours until

the moisture evaporates.

The sound skips.

• Wipe the disc clean (page 24).

• Reload the disc.

• Move the unit to a place with no

vibration (e.g., on top of a stable stand).

• Move the speakers away from the unit,

or place them on separate stands. When

you listen to a track with bass sounds at

high volume, the speaker vibration may

cause the sound to skip.

Playback does not start from the first

track.

• Set the play mode to Normal Play

(page 9).

The folder name, track name, file

name and ID3 tag characters do not

appear properly.

• Use a disc that conforms to ISO9660

Level 1/Level 2, or Joliet (expansion

format).

• The ID3 tag is not Version 1(1.0/1.1)

and Version 2(2.2/2.3).

• The character code that can be displayed

by this system are as follows:

– Upper cases (A to Z)

– Numbers (0 to 9)

– Symbols (< > * +, \ _)

Other characters appear as "_".

The disc tray does not open and

"LOCKED" appears.

• Contact your Sony dealer or local

authorized Sony service facility.

USB device

Transferring results in an error.

• You are using an unsupported USB

device. Check the information on the

websites about compatible USB devices

(page 12).

• The USB device is not formatted

correctly. Refer to the operating

instructions of the USB device on how

to format.

• Turn off the system and remove the

USB device. If the USB device has a

power switch, turn the USB device off

and then on again after removing it from

the system. Then perform transferring

again.

• If the transferring and erase operations

are repeated multiple times, the file

structure within the USB device

becomes fragmented. Refer to the

operating instructions of the USB

device on how to deal with this problem.

• The USB device was disconnected or

the power was turned off during

transferring. Delete the partially-

transferred file, and perform

transferring again. If this does not fix the

problem, the USB device may be

broken. Refer to the operating

instructions of the USB device on how

to deal with this problem.

Audio files or folders on the USB

device cannot be erased.

• Check if the USB device is write-

protected.

• The USB device was disconnected or

the power was turned off during the

erase operation. Delete the partially-

erased file. If this does not fix the

problem, the USB device may be

broken. Refer to operating instructions

of the USB device on how to deal with

this problem.

Continued