Sony MHC-GN660 Manuel d'utilisation - Page 40

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-GN660. Sony MHC-GN660 48 pages. Sony mhc-gn660 stereo system: user guide
Également pour Sony MHC-GN660 : Manuel d'utilisation (48 pages)

Imprimer la page

Additional Information

Precautions

On operating voltage

Before operating the system, check that the operating

voltage of your system is identical with the voltage of

your local power supply.

On safety

• The system is not disconnected from the AC power

source (mains) as long as it is connected to the wall

outlet, even if the system itself has been turned off.

• Unplug the system from the wall outlet (mains) if it

is not to be used for an extended period of time. To

disconnect the power cord (mains lead), pull it out by

the plug. Never pull the cord itself.

• Should any solid object or liquid fall into the system,

unplug the system and have it checked by qualified

personnel before operating it any further.

• For customers in United States

One blade of the plug is wider than other for the

purpose of safety and will fit to the wall outlet only

one way. If you are unable to insert the plug fully into

the outlet, contact your dealer.

• AC power cord must be changed only at the qualified

service shop.

On placement

• Do not place the system in an inclined position.

• Do not place the system in locations where it is;

– Extremely hot or cold

– Dusty or dirty

– Very humid

– Subject to vibrations

– Subject to direct sunlight.

• Use caution when placing the system or speakers on

surfaces that have been specially treated (with wax,

oil, polish, etc.) as staining or discoloration of the

surface may result.

On heat build-up

• Although the system heats up during operation, this

is not a malfunction.

• Place the system in a location with adequate

ventilation to prevent heat build-up in the system.

• If you continuously use this system at a large volume,

the cabinet temperature of the top, side and bottom

rises considerably. To avoid burning yourself, do not

touch the cabinet.

• To prevent a malfunction, do not cover the

ventilation hole for the cooling fan.

On operation

• If the system is brought directly from a cold to a

warm location, or is placed in a very damp room,

moisture may condense on the lens inside the system.

Should this occur, the system will not operate

properly. Remove the disc and leave the system

turned on for about an hour until the moisture

evaporates.

• When you move the system, take out any disc.

If you have any questions or problems concerning your

system, please consult your nearest Sony dealer.

Notes on discs

• Before playing, clean the disc with a cleaning cloth.

Wipe the disc from the center out.

• Do not use solvents such as benzene, thinner,

commercially available cleaners or anti-static spray

intended for vinyl LPs.

• Do not expose the disc to direct sunlight or heat

sources such as hot air ducts nor leave it in a car

parked in direct sunlight.

• Do not use discs encircled with a protection ring.

This may cause a malfunction to the system.

• When using discs that have glue or similar tacky

substance on the label side of the disc or that used a

special ink when the label was printed, there is a

chance that the disc or label may become attached to

parts inside this system. When this occurs, it may not

be possible to remove the disc, and may also cause

this system to malfunction. Be sure to check that the

label side of the disc is not sticky before using.

The following types of disc should not be used:

– Rental or used discs with attached seals where the

glue extends beyond the seal. The perimeter of the

seal on the disc is tacky.

– Discs that have labels printed using a special ink

that feels tacky when touched.

• Discs with non-standard shapes (e.g., heart, square,

star) cannot be played back on this system.

Attempting to do so may damage the system. Do not

use such discs.