Sony MHC-GNX600 Manuel d'utilisation - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-GNX600. Sony MHC-GNX600 40 pages. Mini hi-fi component system
Imprimer la page
Other operations
To
Stop playback
Pause playback
Fast-forward or
rewind
Remove a tape
Note
Do not press Z PUSH (Deck A) or Z PUSH (Deck B)
while playing a tape, otherwise the tape could be
damaged.
Tips
• When a tape is inserted, corresponding presence
indicator lights up in the display.
• If you press TAPE A/B (or TAPE on the remote)
while the system is turned off, the system turns on
automatically and "TAPE A" or "TAPE B" is
selected as the function.
• If you press N during "TAPE A" function and there
is no tape in Deck A, the system automatically
switches to "TAPE B" function when there is a tape
in Deck B. Then, playback will start and vice versa.
• You can also press FUNCTION on the remote
repeatedly to select "TAPE A" or "TAPE B".
16
GB
Do this
Press x.
Press X. Press X again to resume
playback.
Press m or M. To back to
normal playback, press N.
Press Z PUSH (Deck A) or
Z PUSH (Deck B) when playback
is stopped.
Tape – Recording
Recording your favorite
tracks on a disc into a
tape
— CD Synchro Recording
You can record an AUDIO CD or an album of
MP3 audio tracks into a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
1
Load a recordable tape into Deck B.
2
Press CD and load a disc you want to
record.
When you want to record an album of MP3
audio tracks, press PLAY MODE on the
remote repeatedly until "ALBM" lights up
in the display. Then press ALBUM +/–
repeatedly to select the album you want.
3
Press CD SYNC.
"SYNC" lights up in the display.
"REC" flashes in the display.
Deck B standby for recording.
4
Press REC PAUSE/START.
"REC" lights up in the display.
Recording starts.
To stop recording
Press x.
To record a disc by specifying
track order
— Program Edit
You can record tracks on all the discs in the
order you want using Program Play. Between
steps 2 and step 3 of "CD Synchro Recording"
(page 16), do steps 2 to 6 of "Creating your own
program" (page 12). When programming, make
sure the playing times do not exceed the length
of one side of the tape.
Note
You cannot listen to other sources while recording.