Sony MHC-GRX30J Manuel d'utilisation - Page 43
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-GRX30J. Sony MHC-GRX30J 49 pages. Sony operating instructions mini hi-fi component system mhc-rxd5, mhc-r550, mhc-grx30, mhc-grx30j
Également pour Sony MHC-GRX30J : Manuel d'utilisation (48 pages)
Tape Deck
The tape does not record.
•No tape in the cassette holder.
•The tab has been removed from the
cassette (see "To save a tape
permanently" on page 40).
•The tape has reeled to the end.
The tape does not record nor play or there
is a decrease in sound level.
•The heads are dirty. Clean them (see
"Cleaning the tape heads" on page 41).
•The record/playback heads are
magnetized. Demagnetize them (see
"Demagnetizing the tape heads" on page
41).
The tape does not erase completely.
•The record/playback heads are
magnetized. Demagnetize them (see
"Demagnetizing the tape heads" on page
41).
There is excessive w ow or flutter, or the
sound drops out.
•The capstans or pinch rollers are dirty.
Clean them (see "Cleaning the tape
heads" on page 41).
Noise increases or the high frequencies are
erased.
•The record/playback heads are
magnetized. Demagnetize them (see
"Demagnetizing the tape heads" on page
41).
After pressing ( ( 9 ) or 6 , there is a
mechanical noise, "EJECT" appears in the
display, and the unit enters standby mode
automatically.
• The cassette tape was not inserted
correctly. Eject the tape and turn the
power back on.
Downloaded from:
https://www.usersmanualguide.com/
Tuner
Severe hum or noise ("TUNED" or
"STEREO" flashes in the display).
•Adjust the antenna.
•The signal strength is too weak. Connect
the external antenna.
A stereo FM program cannot be received in
stereo.
•Press REPEAT STEREO/MONO so that
"MONO" disappears.
If ot her t roubles not described
above occur, reset t he syst em as
f ollow s:
1 Unplug the power cord.
2 Plug the power cord back in.
3 Press p, ENTER/NEXT, and
same time.
4 Press
to turn on the power.
The unit is reset to factory settings. All the
settings you made, such as the preset stations,
clock, and timer are cleared. You should set
them again.
at the
43