Sony MHC-GT660 Manuel d'utilisation - Page 33
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-GT660. Sony MHC-GT660 44 pages. Mini hifi component system sony mhc-gt660/ mhc-gt440/ mhc-gt220
Imprimer la page
Others
Troubleshooting
1
Make sure the power cord and
speaker cords are correctly and firmly
connected.
2
Find your problem in the checklist
below, and take the indicated
corrective action.
If the issue persists, contact your
nearest Sony dealer.
If the STANDBY indicator flashes
Immediately unplug the power cord,
and check the following items.
If your system has a voltage selector,
is the voltage selector set to the
correct voltage?
Are the + and speaker cords
short-circuited?
Are you using only the supplied
speakers?
Is anything blocking the ventilation
holes on the back of the system?
After the STANDBY indicator
stops flashing, reconnect the power
cord, and turn on the system. If the
issue persists, contact your nearest
Sony dealer.
General
The display starts flashing as soon
as you plug in the power cord even
though you have not turned on the
system.
Press DISPLAY
system is off. The demonstration
disappears.
Sound comes from one channel,
or the left and right volumes are
unbalanced.
Place the speakers as symmetrically as
possible.
Connect only the supplied speakers.
Sound lacks bass.
Check that the Black (or Red) cord is
connected to the speaker's (or +)
jack correctly.
Severe hum or noise.
Move the system away from sources of
noise.
Connect the system to a different wall
socket.
Install a noise filter (available
separately) to the power cord.
The remote does not function.
Remove any obstacles between the
remote and the remote sensor
the unit, and position the unit away
from fluorescent lights.
Point the remote at the system's sensor.
Move the remote closer to the system.
once while the
on
Continued
GB