Sony MHC-M20 Manuel d'utilisation - Page 38
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-M20. Sony MHC-M20 48 pages.
Imprimer la page
There is no sound from a specific
speaker.
Check that the speaker is
• •
connected securely and correctly.
Disc player
The disc tray does not open and
"LOCKED" appears on the display.
Consult your nearest Sony dealer
• •
or local authorized Sony service
facility.
The disc tray does not close.
Load the disc correctly.
• •
The disc does not eject.
You cannot eject the disc during
• •
Synchronized Transfer or REC1
Transfer. Press to cancel the
transfer, then press on the unit
to eject the disc.
Consult your nearest Sony dealer.
• •
Playback does not start.
Wipe the disc clean (page 43).
• •
Reload the disc.
• •
Load the disc that this system can
• •
play back (page 8).
Remove the disc and wipe away
• •
the moisture on the disc, then
leave the system turned on for
a few hours until the moisture
evaporates.
The sound skips.
Wipe the disc clean (page 43).
• •
Reload the disc.
• •
Move the unit to a place with no
• •
vibration.
Move the speakers away from the
• •
unit. When you listen to a track
with bass sounds at high volume,
the speaker vibration may cause
the sound to skip.
38
US
Playback does not start from the
first track.
Set the play mode to Normal Play
• •
(page 18).
Resume Play has been selected.
• •
Press twice. Then, press to
start playback.
The MP3 disc cannot be played
back.
The data is not stored in the
• •
supported format.
The folder name, track name, file
name and ID3 tag characters do
not appear properly.
The ID3 tag is not Version 1 (1.0/1.1)
• •
or Version 2 (2.2/2.3).
The character codes that can be
• •
displayed by this system are as
follows:
•
— Upper cases (A to Z)
•
— Numbers (0 to 9)
•
— Symbols (< > * +, [ ] \ _)
Other characters appear as "_".
USB device
Transferring results in an error.
You are using an unsupported USB
• •
device. Check the information on
the website about compatible USB
devices (page 10).
The USB device is not formatted
• •
correctly. Refer to the operating
instructions of the USB device on
how to format.
Turn off the system and remove
• •
the USB device. If the USB device
has a power switch, turn the USB
device off and on again after
removing it from the system. Then,
perform the transfer again.