Sony MHC-MG110 - Mini Hi-fi Component System Manuel d'utilisation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-MG110 - Mini Hi-fi Component System. Sony MHC-MG110 - Mini Hi-fi Component System 40 pages. Sony operating instructions mini hi-fi component system mhc-mg510av,mhc-mg310av,mhc-mg110
Également pour Sony MHC-MG110 - Mini Hi-fi Component System : Manuel d'utilisation (41 pages)

Imprimer la page

The disc number* at the loading position

appears in the display. As you turn DISC

ACCESS, the disc number or Disc Memo

changes.

* If you have already loaded discs, the disc

number at the playing position appears. When

you turn DISC ACCESS, the displayed disc

number changes to the one at the loading

position.

Disc number

Total number of tracks and total playing time

Insert a disc with the label side facing

right.

Notes

• Make sure you have loaded the disc into each

slot at a right angle to the rotary table. If the

disc is not put in straight, it may damage the

unit or the disc.

• Make sure the rotary table comes to a complete

stop before loading or removing discs.

With the label

side facing

right

Repeat steps 2 and 3 to load additional

discs.

Close the front cover by pushing the

right edge of the cover until it clicks.

The rotary table turns and the disc slot at the

loading position is set to the playing

position.

Removing CDs

After following step 1 of "Loading a CD" on

page 12, remove the discs. Then close the front

cover.

Notes

• Always close the front cover except when you load

or remove discs.

• Do not load an empty 8 cm CD adaptor. It may

damage the unit.

• Do not attach anything such as seals or sleeves to

CDs. It may damage the unit or the disc.

• If you drop a disc into the unit and the CD will not

go into the slot correctly, consult your nearest Sony

dealer.

• When transporting the unit, remove all discs from

the unit.

• If you want to remove the disc played, open the

front cover. The disc comes to the loading position.

Remove the disc after the rotary table comes to a

complete stop.

Tip

You can display the original Disc Memos instead of

the disc numbers (see "Labeling a CD" on page 16) to

locate the disc easily when you start playing.

When you select a CD-TEXT disc, the disc title is

displayed instead of the disc number.