Sony MHC-RG11 Manuel d'utilisation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-RG11. Sony MHC-RG11 28 pages. Sony operating instructions home stereo system mhc-rg4sr,mhc-rg30t,mhc-rg20,dx10
Également pour Sony MHC-RG11 : Manuel d'utilisation (28 pages)

Imprimer la page

To set another station to an existing

preset number

Start over from step 1. After step 3, press .

or > (or PRESET – or + on the remote)

repeatedly to select the preset number you want

to store the other station.

You can preset a new station in the selected

preset number.

To erase a preset station

Press and hold TUNER MEMORY on the

remote until a preset number appears in

the display.

Press . or > (or PRESET – or + on

the remote) repeatedly to select the preset

number you want to erase.

Select "ALL ERASE" when you want to

erase all the preset stations.

Press ENTER on the remote.

"COMPLETE" appears.

When you erase a preset number, the preset

number decreases by one and all preset

numbers following the erased one are

renumbered.

To change the AM tuning interval

(except for the European and Middle

Eastern models)

The AM tuning interval is factory-set to 9 kHz

(10 kHz in some areas). To change the AM

tuning interval, tune in any AM station first,

then turn off the system. While holding down

TUNER/BAND, turn the system back on.

When you change the interval, all the AM

preset stations are erased. To reset the interval,

repeat the same procedure.

Tip

The preset stations are retained for half a day even if

you unplug the power cord or if a power failure

occurs.

Listening to the radio

— Preset Tuning

Preset radio stations in the tuner's memory first

(see "Presetting radio stations" on page 12).

Press TUNER/BAND repeatedly to

select "FM" or "AM".

Press . or > (or PRESET – or + on

the remote) repeatedly to tune in the

desired preset station.

Preset number

* When only one station is preset, "ONE

PRESET" appears in the display.

To listen to non-preset radio stations

Use manual or automatic tuning in step 2.

For manual tuning, press m or M (or

TUNING – or + on the remote) repeatedly. For

automatic tuning, press and hold m or M

(or TUNING – or + on the remote).

Tips

• When an FM stereo program has static noise, press

STEREO/MONO repeatedly until "MONO"

appears. There will be no stereo effect, but the

reception will improve.

• To improve broadcast reception, adjust the supplied

antennas.

Frequency*