Sony MHC-RG270 Manuel d'utilisation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-RG270. Sony MHC-RG270 44 pages. Sony operating instructions owner's record mini hi-fi component system mhc-gx555, gx355, gx255, mhc-rg575s, rg475s, rg470, rg270, rg170
Également pour Sony MHC-RG270 : Manuel d'utilisation (45 pages)

Imprimer la page

To change the AM tuning interval

(except for European, Russian

and Saudi Arabian models)

The AM tuning interval is factory-preset to

9 kHz (or 10 kHz for some areas). To change the

AM tuning interval, tune in any AM station first,

then turn off the system. While holding

TUNING MODE on the unit, press ?/1 on the

unit. When you change the interval, all the AM

preset stations are erased. To reset the interval,

repeat the same procedure.

Note

You cannot change the AM tuning interval in Power

Saving Mode (page 24).

Tips

• The preset stations are retained for about a day even

if you disconnect the power cord or if a power failure

occurs.

• To improve broadcast reception, adjust the supplied

antennas, or connect a commercially available

external antenna.

To improve tuner reception

When tuner reception is poor, set CD player

power off by CD power manage function.

CD power is factory set to on.

Use buttons on the unit for the operation.

Press CD to switch the function to CD.

Press ?/1 to turn off the system.

After "STANDBY" stops flashing, press ?/1

while holding x.

"CD POWER OFF" appears.

To set CD power on

Repeat the procedure above and "CD POWER

ON" appears.

Notes

• When "CD POWER OFF" is selected, disc access

time is increased.

• You cannot change the setting in Power Saving

Mode (page 24).

Listening to the radio

You can listen to a radio station either by

selecting a preset station, or by manually tuning

in the station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner's memory first

(see "Presetting radio stations" on page 14).

Press TUNER BAND (or FUNCTION

repeatedly) to switch the function to

TUNER.

Press TUNER BAND repeatedly to

select "FM" or "AM".

Press TUNING MODE repeatedly until

"PRESET" appears in the display.

Press + or – (or turn – TUNING + on the

unit) repeatedly to select the desired

preset station.

Preset number

Frequency

continued