Sony MHC-RG330 Manuel d'utilisation - Page 26
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-RG330. Sony MHC-RG330 40 pages. Mini hi-fi component system
Également pour Sony MHC-RG330 : Manuel d'utilisation (40 pages)
Imprimer la page
Should you encounter
a problem
wid_ your
system, do 1he following:
1
Make sure the power cord and speaker
cords are correctly and firmly connected.
2 Find your problem in the troubleshooting
checklist below and take the indicated
corrective action.
if the problem persists after doing all of the
above, consult your nearest Sony dealer.
When
the
I/_)
indicator
flashes
hnmediately
unplug |he power cord and check
the following
items.
• Is the voltage selector set to 1he correct
voltage?
Check 1he voltage for your region, then make
sure 1he voltage seleclor is set correctly.
• Arethe+and
speakercordsshort-circuged?
• Are you using only 1he prescribed
speakers?
• Is anylhing
blocking
the ventilation
holes on
d_e rear of the syslem?
After checking
Ihe above gems and fixing any
problems,
connect 1he power cord again and turn
on the syslem. If|he indicator
still flashes, or if
the cause of the problem
cannot be lbund even
after checking
all the above items, consult your
nearest Sony dealer.
General
The display
starts flashing
as soon as you
plug in the power
cord even though
you have
not turned
on the system
(see step 5 of
"Hooking
up the system"
(page 6)).
• Press DI SPLAY twice while tile system is off. The
demonstration
disappears.
"- -:-
-" appears
in the display.
• A power interruplion
has occurred.
Set the clock
(page 8) and timer settings
(pages 21 and 22)
again.
The clock setting/radio
presetting/timer
is
canceled.
• Redo tile following:
"Setftng
the clock" (page 8)
"presetting
radio stations"
(page 13)
"Check
_he se_ting" (page 21)
"Timer
recording
radio programs"
(page 21)
There is no sound.
• Press VOL _/or
turn VOLUME
control
on the
unit clockwise.
• Make sure the headphones
are no_ connected.
• Check the speaker connections
(page 6).
• There is no audio output during timer
recording.
Sound
comes from
one channel,
or
unbalanced
left and right volume.
• Place tile speakers
as symmetrically
as possible.
• Connect the supplied
speakers.
Sound
lacks bass.
• Check that the speaker's
_ and
,jacks are
connected
correctly.
There iS severe hum or noise.
• Move the system
away from tile source of noise.
• Connect the system to a different
wall outlet.
• Instab a noise filter (commercially
available)
to
the mains line.
The timer cannot
be set.
• Set the clock again (page 8).
The timer does not function.
• Check the timer setting and set the correct
time
(pages 2! and 22).
• Cancel the Sleep Timer Function
(page 20).
The remote
does not function.
• Remove the obstacle.
• Move the remole
closer to tbe syslem.
• Point file remote at 1he system's
sensor.
• Replace
the balteries
(R6/size
AA).
• Locate the system away from the fluorescent
light.
There is acoustic
feedback.
• Reduce the volume.
The color irregularity
on a TV screen
persists.
• Turn oft'the
TV set once, tben turn it on after 15
to 30 minutes.
If the color irregularity
still
persists,
place the speakers
farther away from _be
TV sel.
26GB