Sony MHC-RG60 Manuel d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-RG60. Sony MHC-RG60 32 pages. Sony mhc-dx30 stereo system: system manual
Également pour Sony MHC-RG60 : Manuel d'instruction (32 pages)
Imprimer la page
3 Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
Jack type A
Extend the FM lead antenna
AM loop antenna
horizontally
Jack type B
Extend the FM lead antenna
horizontally
AM loop antenna
4 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
230 - 240V
5 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adapter on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adapter).
To connect optional components
See page 22.
220V
120V
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the speakers
and prevent them from slipping.
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• Do not place the surround speakers on top of a TV.
This may cause distortion of the colors in the TV
screen.
• Be sure to connect both left and right surround
speakers. Otherwise, the sound will not be heard.
Positioning the speakers (MHC-RG60
only)
1
Place the front speakers at an angle of
45 degrees from your listening
position.
Front
speaker
(L)
45º
Surround
speaker
(L)
2
Place the surround speakers facing
each other at about 60 to 90 cm above
your listening position.
60 to 90 cm
Front
speaker
(R)
Surround
speaker
(R)
Surround
speaker
continued
7