Sony MHC-RV2 Manuel d'utilisation - Page 38

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-RV2. Sony MHC-RV2 40 pages. Sony operating instructions mini hi-fi component system mhc-rv2

Imprimer la page

Precautions (continued)

Before placing a cassette in the tape

deck

Take up any slack in the tape. Otherwise the tape may

get entangled in the parts of the tape deck and become

damaged.

When using a tape longer than 90

minutes

The tape is very elastic. Do not change the tape

operations such as play, stop, and fast-winding

frequently. The tape may get entangled in the tape

deck.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use.

Be sure to clean the tape heads before you start an

important recording or after playing an old tape. Use

a separately sold dry-type or wet-type cleaning

cassette. For details, refer to the instructions of the

cleaning cassette.

Demagnetizing the tape heads

Demagnetize the tape heads and the metal parts that

have contact with the tape every 20 to 30 hours of use

with a separately sold demagnetizing cassette. For

details, refer to the instructions of the demagnetizing

cassette.

Specifications

Amplifier section

The following measured at AC 120, 127, 220, 240 V

50/60 Hz

DIN power output (rated) 50 + 50 watts

Continuous RMS power output (reference)

Inputs

GAME INPUT (VIDEO) (phono jack):

GAME INPUT (AUDIO) (phono jacks):

MIC (phone jack):

Outputs

VIDEO OUT (phono jack):

PHONES (stereo mini jack):

SPEAKER:

(6 ohms at 1 kHz, DIN)

60 + 60 watts

(6 ohms at 1 kHz, 10%

THD)

1Vp-p, 75 ohms

voltage 250 mV,

impedance 47 kilohms

sensitivity 1 mV,

impedance 10 kilohms

max. output level

1Vp-p, unbalanced, Sync

negative, load impedance

75 ohms

accepts headphones of

8 ohms or more

accepts impedance of 6 to

16 ohms