Sony MHC-RX70 Manuel d'utilisation - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-RX70. Sony MHC-RX70 50 pages. Mini hifi component system
Également pour Sony MHC-RX70 : Manuel d'utilisation (44 pages), Manuel d'utilisation (44 pages), Manuel d'utilisation (44 pages)
Imprimer la page
Listening to the radio (continued)
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
the bands you can recieve vary
depending on the model you purchased.
Be sure to check which bands you can
recieve.
Every time you press this button, the
band changes as follows:
3 band models:
FM n MW n LW
4 band model:
FM n MW n LW n UKV*
* "STEREO PLUS" is displayed when you select
UKV.
2
Press TUNING MODE repeatedly
so that "PRESET" appears in the
display.
MANUAL n AUTO n PRESET
3
Turn the jog dial (or press = or
+ on the remote) to tune in the
desired preset station.
Turn counter-
clockwise
(or press =
–
on the remote)
for lower preset
numbers.
Preset number
PRESET
To
Do this
Turn off the radio
Press POWER.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
14
To listen to non-preset radio
stations
Press TUNING MODE repeatedly so that
"MANUAL" appears in step 2, then tune in
the station by turning the jog dial.
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• When an FM programme is noisy, press
STEREO/MONO so that "MONO" appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied aerials.
Turn clockwise
(or press +
+
on the remote)
for higher
preset numbers.
Frequency
TUNED
STEREO
VOLUME
MHz