Sony MHC-RX80 Manuel d'utilisation - Page 48
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-RX80. Sony MHC-RX80 50 pages. Mini hi-fi component system
Imprimer la page
Specifications
Amplifier section
DIN power output
Continuous RMS power output
Music power output
Inputs
Outputs
CD player section
System
Laser
Laser output
Frequency response
Wavelength
Signal-to-noise ratio
Dynamic range
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
Output Level
42
40 + 40 watts
(6 ohms, at 1kHz, DIN)
55 + 55 watts
(6 ohms at 1 kHz,
10% THD)
95 + 95 watts
(6 ohms at 1 kHz, 10%
THD)
VIDEO/MD IN (phono
jacks): voltage 250 mV,
impedance 47 kilohms
MIX MIC (phone jack):
sensitivity 1 mV,
impedance 10 kilohms
VIDEO/MD OUT (phono
jacks): voltage 250 mV
impedance 1 kilohms
PHONES (stereo phone
jack): accepts headphones
of 8 ohms or more.
SPEAKER: accepts
impedance of 8 to 16
ohms.
SURROUND SPEAKER
(MHC-RX80 only):
accepts impedance of 16
ohms.
Compact disc and digital
audio system
Semiconductor laser
( =780nm)
Emission duration:
continuous
Max. 44.6 W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
2 Hz – 20 kHz (±0.5 dB)
780 – 790 nm
More than 90 dB
More than 90 dB
600 nm
–18 dBm
Tape player section
Recording system
4-track 2-channel stereo
Frequency response
60 – 13,000 Hz (±3 dB),
(DOLBY NR OFF)
using Sony TYPE I
cassette
60 – 14,000 Hz (±3 dB),
using Sony TYPE II
cassette
Wow and flutter
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
3 band type model:
87.5 – 108.0 MHz
(50 kHz setp)
4 band type model:
65.0 – 74.0 MHz (10 kHz
step)
87.5 – 108.0 MHz
(50 kHz step)
Aerial
FM Lead aerial
Aerial terminals
75 ohm unbalanced
Intermediate frequency
10.7 MHz
UKV tuner section (4 band type model only)
Tuning range
65.0-74.0 MHz
(10 kHz step)
Polar Stereo
AM tuner section
Tuning range
MW: 531 – 1,602 kHz
(with interval set at
9 kHz)
LW: 153 – 279 kHz
(with interval set at
3 kHz)
Aerial
AM loop aerial
External aerial terminal
Intermediate frequency
450 kHz