Sony MHC-V3 Manuel d'utilisation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony MHC-V3. Sony MHC-V3 36 pages.

Imprimer la page

USB Transfer

Transferring music

You can transfer music from a disc

(AUDIO CD or MP3 disc only) to a USB

device.

The audio format of files transferred by

this system is MP3.

Notes

• Do not remove the USB device during

transfer or erase operations. Doing so may

corrupt the data on the USB device or damage

the USB device itself.

• MP3/WMA/AAC files are transferred with

the same bit rate as the original files.

• USB transfer and erase operations are

disabled while the disc tray is open.

Note on copyright-protected

content

The transferred music is limited to private

use only. Use of the music beyond this

limit requires permission of the copyright

holders.

To select the playback source or

transfer destination (USB Memory

Select)

See page 10.

To select the bit rate

You can select a higher bit rate when you

want to transfer music from an AUDIO

CD.

Use the buttons on the unit to perform this

operation.

Press OPTIONS.

Press V/v repeatedly to select "BIT

RATE", then press ENTER.

Press V/v repeatedly to select the

bit rate you want, then press

ENTER.

• 128 KBPS: encoded MP3 files have

smaller file size and lower audio

quality.

• 256 KBPS: encoded MP3 files have

bigger file size but higher audio

quality.

To exit the options menu, press

OPTIONS.

Transferring music from a disc

You can easily transfer all the music on a

disc to USB device (Synchronized

Transfer). You can also transfer a single

track or audio file during playback

(REC1 Transfer).

Connect a USB device to the

port.

Press CD, then load the disc.

For Synchronized Transfer:

When playback is stopped, press

PLAY MODE repeatedly to select the

play mode you want.

Notes

• If you start transferring in Shuffle Play

("FLDR SHUF"), the selected play mode

changes to "FLDR" automatically.

• If you start transferring in Shuffle Play

(except "FLDR SHUF"), Repeat Play or

Program Play with no steps, the selected

play mode changes to Normal Play

automatically.

For REC1 Transfer:

Select the track or audio file you want

to transfer, then start playback.

Press REC TO USB on the unit.

"PUSH ENTER" appears in the

display panel.

Press ENTER.

The transfer starts when "DO NOT

REMOVE" appears in the display

panel.