Cisco ASA 5516-X Manuel d'installation du matériel - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Cisco ASA 5516-X. Cisco ASA 5516-X 32 pages. Threat defense reimage guide
Également pour Cisco ASA 5516-X : Manuel de démarrage rapide (8 pages), Manuel d'installation facile (11 pages), Manuel de démarrage rapide (9 pages), Manuel du logiciel (37 pages), Monter et connecter (6 pages), Manuel (14 pages)

Mount and Connect

Disconnect the ASA console terminal before uninstalling the driver.

Note

Step 1

Obtain the appropriate driver (Cisco_usbconsole_driver_X_X_zip, where X is a revision number) for your ASA model

from the Cisco

Step 2

Install the driver.

Step 3

Connect a USB 5-pin Mini USB Type B to the USB console port as shown in the following figure.

Figure 20: ASA 5508-X and ASA 5516-X Console Port Connection

Step 4

Connect the end of the cable with the DB-9 connector (or USB Type A) to the terminal or PC. If your terminal or PC

has a console port that does not accommodate a DB-9 connector, you must provide an appropriate adapter for that port.

The LED for the console port turns green and within a few moments the Found New Hardware Wizard appears.

Step 5

Follow the instructions to complete the driver installation.

Step 6

To communicate with the ASA, start a terminal emulator application. This software should be configured with the

following parameters:

• 9600 baud

• 8 data bits

• no parity

• 1 stop bit

• no flow control

Online Only

Download Software

site, USB Console Software category.

Mini USB Type B console port

USB Type A

Connect to the Console Port with Microsoft Windows

Mini USB Type B to USB Type A

console cable

Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide