Sony MZ-NH900 Manuel de configuration - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Sony MZ-NH900. Sony MZ-NH900 18 pages. Portable memory stick audio player / portable minidisc recorder / portable cd player
Également pour Sony MZ-NH900 : Manuel d'utilisation (24 pages), Spécifications (2 pages), Note de mise à jour (1 pages), Spécifications (2 pages), Garantie limitée (1 pages)

Imprimer la page

place it in pause and then use the menu to change to Manual

Record level. Push the RED REC button down and slide the button to

the right to put the recorder in instant record mode (auto gain).

Press on the PAUSE BUTTON. Press and hold the Navi/Menu button

for 2 seconds until the menu window activates. Rotate jog wheel until

"REC Set" is blinking. Select "REC Volume," and then "Manual." You

can now adjust Record Level manually with the Jog Wheel. Set the

record level gain so the normal volume "peaks" cause about 1/2 of

the segments to come on (turn black). Notice that the over-

modulation segment occurs right under the "0" of "30."

You can change the record level as the deck while recording if

necessary.

15. To start recording, press again on the Pause button. When you are

ready to stop recording, press on the PAUSE button again. Try to

not stop the recorder with the STOP button unless you are taking a

break because this will take the deck out of Manual Record Level

mode.

Note that the recorder jumps to unused disc space when a

new recording is started. Recordings are organized into "groups."

'Group" includes all the tracks made with the pause button. Pressing

STOP will cause a new "group" to be created the next time the a

recording is made on the disc.

16. To raise the headphone volume, press on the top edge of the

ENTER button and on the lower edge to lower the headphone

volume.

This may take some practice.

17. You can create a marker for a new track as the Recorder is running

by pressing the "T mark" button above the mic input jack. This will

create a new track at this point making it much easier to locate later.

18.

Allow the Record to Save the

recorder needs to write the file to the disk in order to save it.

NOT remove the disk or turn off the power to the unit by removing

the battery or power cord during this phase or you will lose the

recordings on the disc.

Files. After pressing STOP, the