Sony NAS-IX001P - Network Component Of Cpf-ix001 Wireless Audio System Manuel d'installation rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Sony NAS-IX001P - Network Component Of Cpf-ix001 Wireless Audio System. Sony NAS-IX001P - Network Component Of Cpf-ix001 Wireless Audio System 2 pages. Wireless network audio system

Imprimer la page
Step 3
Make the wireless settings.
1
Confirm the settings of your wireless
system.
Check the following items of your wireless LAN router to set the
same information for the CPF-IX001.
SSID (Wireless Network Name):
If your wireless LAN router security is enabled,
Security mode:
Key:
Key Number
(when using WEP):
Tips
 For details on how to check the wireless LAN router settings, refer to the
operation manual of your wireless LAN router.
 Check that your wireless LAN router uses the latest firmware version. For
details, refer to the operation manual of your wireless LAN router.
2
Press MENU.
Press  or  repeatedly until "WLAN SETUP?" appears in
the display, then press ENTER.
The IP address appears in the display.
MENU
ENTER
3
Start up the "WLAN Setup Assistant" on
your computer.
Select [Start] – [All Programs] – [M-crew Server] – [TOOLS]
– [WLAN Setup Assistant].
4
Press NEXT.
Wait a moment for Internet Explorer to start up.
5
Enter "root" to "User name" section.
Leave "Password" section blank, and
click [OK] to login.
6
Select the language.
7
Click "Wireless LAN Setup" in the Menu
on your computer.
The Setup screen appears.
8
Enter the SSID, Security mode and Key
that you checked in Step 3-1, and click
[Setup].
Tips
 When using WEP, check that the router Key No. and the above setting
match.
 In most cases only one WEP Key No. is required, in which case enter the
WEP Key No. to "WEP Key No. 1. "
9
After finishing the setup, click "Restart
Audio Client" in the Menu, and then
click [Restart].
The CPF-IX001 restarts, and the settings are complete.
10
Set the WIRELESS/WIRED selector
to WIRELESS (see Step 2-1), and
disconnect the network cable from the
network unit.
"Configuring" flashes in the display and the network is
configured.
Tip
"Configuring" may flash for several minutes.
11
Press  and check that music or
sample music is played.
Troubleshooting
Step
Symptom
Action
1-2
The firewall settings
Follow the instructions on the
screen appear.
screen to allow the M-crew
communication.
2-4
"Configuring"
If an IP address has been specified
continues to flash
in your computer's network
in the display for
settings, change the setting to
longer than five
automatically acquire the IP
minutes without the
address.
configuration being
completed.
"No Server" appears
Follow the procedures below one
in the display.
by one.
1 Confirm the security software
(Firewall) setting on your
computer.
2 Restart the M-crew Server.
2-1 Select "Stop music server" on
the M-crew Server task tray
icon.
2-2 Select "Start music server"
on the M-crew Server task
tray icon.
3 Reboot your computer.
4 Execute "DatabaseClear.exe"
to initialize the database
(usually located in C:\Program
Files\Mcrewserver). When the
database is initialized the music
links are deleted, so reset the
links.
3-1,
What is "SSID" or
"SSID" is the wireless LAN
"Security Mode"?
identifier and "Security Mode"
3-8
is a communication encryption
method. These may be included
with your access point. If
your wireless key is a string of
10 characters, select WEP (64-bit)
for "Security Mode. " For more
details, check the settings of your
access point.
3-3
The "WLAN Setup
If you are using a proxy server
Assistant" does not
with your browser, disconnect it
appear on the screen.
temporarily.
3-11
"Check Net" appears
The signal is not strong enough.
in the display while
Move the CPF-IX001 closer to the
the wireless icon
access point. If the CPF-IX001 is
(
) is flashing.
already close to the access point,
check the configuration of the
access point to ensure that the
access point is sending a signal.
Once the changes have been made
to the access point, toggle the
WIRED/WIRELESS selector to
reconfigure setting.
Check the wireless channel of the
wireless LAN router. Channels 1 to
11 can be used with the CPF-IX001.
"No Server" appears
The wireless key may have been
in the display while
entered incorrectly. Go back to a
the wireless icon
wired connection and perform the
(
) lights up.
settings again from Step 3-2.