Sony PS-HX500 Manuel d'entretien - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Sony PS-HX500. Sony PS-HX500 26 pages. Stereo turntable system
Également pour Sony PS-HX500 : Manuel d'utilisation (28 pages)
Imprimer la page
PS-HX500
2-7.
FOOT ASSY, COVER_MOTOR
Note 1: When turning the main unit over, refer to "NOTE IN THE
CASE OF THE REVERSING THE MAIN UNIT" on page 3.
Note 2: All four foot assys (rubber + base) can be removed using the
same procedure.
1 Rotate the foot assy (rubber block)
in the direction of the arrow.
foot assy (rubber block)
2-8.
SWITCH KNOB
Note: When turning the main unit over, refer to "NOTE IN THE
CASE OF THE REVERSING THE MAIN UNIT" on page 3.
1 Push the switch knob by
a flathead screwdriver.
bottom side
12
2 foot assy
(rubber block)
3 screw
(3
12)
4 foot assy
(base block)
bottom side
front side
hole
front side
2 switch knob
6 cover_motor
How to install the switch knob
When installing the switch knob to the rotary encoder, align
the directions of the D-shaped tip of the rotary encoder and
the D-shaped notch at the inner side of the switch knob.
switch knob
rotary encoder
5 three screws
(3
12)
5 screw
(3
12)
top side
front side