Sony RDP-XA900iPN Manuel de configuration du réseau - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de configuration du réseau pour {nom_de_la_catégorie} Sony RDP-XA900iPN. Sony RDP-XA900iPN 28 pages. Marketing specifications
Également pour Sony RDP-XA900iPN : Manuel (2 pages), Spécifications (2 pages)
Imprimer la page
Setup device:
Method:
Before Starting
1
Check that the iPhone/iPod touch/iPad
you are using as the "AirPlay" device is
connecting to the Wi-Fi Network.
2
Write down the Security Key (WEP or
WPA key) of your wireless LAN router/
access point.
For details, refer to the operating
instructions of the router/access point.
3
Press to open the Docking Tray, and
connect your iPhone/iPod touch/iPad to
the connector.
4
Turn this unit on (page 4).
The LINK indicator (page 7) starts to flash
green.
5
Wait for about 70 seconds until the LINK
indicator turns off.
Tip
If the message to download D-Sappli appears, follow
the on-screen instructions and download it.
Notes
While it is connected to a Wi-Fi Network, do not
turn this unit off, press the Home button, or
disconnect your iPhone/iPod touch/iPad.
When a problem occurs during Wi-Fi settings,
disconnect your iPhone/iPod touch/iPad and
connect it again.
GB
iPhone
D-Sappli
iPod touch
/
setup
Starting Network Settings
1
Tap the D-Sappli icon to access it while
keeping your iPhone/iPod touch/iPad on
this unit.
2
Perform the network settings, following
the on-screen instructions.
3
When the message [Connection
complete.] appears, tap [OK] to finish the
network settings.
4
Check the status of the LINK indicator
(page 7).
When the LINK indicator lights up green,
the connection is established.
iPad
/