Sony RMM-2000 Mode d'emploi - Page 2
Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Sony RMM-2000. Sony RMM-2000 2 pages.
Imprimer la pagePrecautions
If these products are installed incorrectly, personal
injury or damage to peripheral items may occur due to
fire, shock, or other accidental circumstances. To
avoid such risks, installation should be performed by
trained service technicians.
To technician installing the boards/units
For the BKSR-2021/2025/2030/2035/2070/U2000,
please refer to the installation manual supplied with
that model for installation instructions. For other
models, please refer to the installation manual of the
VSR-2000/2000A Multi Access Video and Audio
Server.
Introduction
These products are optional boards, upgrade kit, hard
disk units, upgrade kit and rack mount kit designed for
the VSR-2000/2000A Multi Access Video and Audio
Server. (The BKSR-2070 and BKSR-U2000 are
exclusive for the VSR-2000, and the BKSR-2025,
BKSR-2035, and BKSH-272G are exclusive for the
VSR-2000A.)
Please refer to the operating insturctions supplied with the VSR-
2000/2000A for your assistance.
For the customers in the USA (BKSR-2020/2021/2025/
2030/2031/2035/2070)
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
The shielded interface cable recommended in this manual
must be used with this equipment in order to comply with the
limits for a digital device pursuant to Subpart B of Part 15 of
FCC Rules.
This Class A digital device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
For customers in Canada
This Class A digital apparatus complies with Canadian ICES-
003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
For the customers in Europe (BKSR-2020/2021/2025/
2030/2031/2035/2070/U2000, BKSH-236G/272G)
This product with the CE marking complies with the EMC
Directive (89/336/EEC) issued by the Commission of the
European Community.
Compliance with this directive implies conformity to the
following European standards:
• EN55103-1: Electromagnetic Interference (Emission)
• EN55103-2: Electromagnetic Susceptibility (Immunity)
This product is intended for use in the following
Electromagnetic Environment(s):
E1 (residential), E2 (commercial and light industrial),
E3 (urban outdoors) and E4 (controlled EMC environment,
ex. TV studio).
Pour les clients européens (BKSR-2020/2021/2025/2030/
2031/2035/2070/U2000, BKSH-236G/272G)
Ce produit portant la marque CE est conforme à la Directive
sur la compatibilité électromagnétique (EMC) (89/336/CEE)
émise par la Commission de la Communauté Européenne.
La conformité à cette directive implique la conformité aux
normes européennes suivantes:
• EN55103-1: Interférences électromagnétiques (émission)
• EN55103-2: Sensibilité électromagnétique (immunité)
Ce produit est prévu pour être utilisé dans les
environnements électromagnétiques suivants:
E1 (résidentiel), E2 (commercial et industrie légère),
E3 (urbain extérieur) et E4 (environnement EMC contrôlé,
ex. studio de télévision).
Für Kunden in Europa (BKSR-2020/2021/2025/2030/2031/
2035/2070/U2000, BKSH-236G/272G)
Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt die
EMV-Direktive (89/336/EEC) der EG-Kommission.
Die Erfüllung dieser Direktive bedeutet Konformität für die
folgenden Europäischen Normen:
• EN55103-1: Elektromagnetische Interferenz (Emission)
• EN55103-2: Elektromagnetische Empfindlichkeit
(Immunität)
Dieses Produkt ist für den Einsatz unter folgenden
elektromagnetischen Bedingungen ausgelegt:
E1 (Wohnbereich), E2 (kommerzieller und in beschränktem
Maße industrieller Bereich), E3 (Stadtbereich im Freien) und
E4 (kontrollierter EMV-Bereich, z.B. Fernsehstudio).