Sony SA-NS400 Manuel d'utilisation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony SA-NS400. Sony SA-NS400 40 pages. Wireless network speakers
Également pour Sony SA-NS400 : Manuel d'instruction et d'utilisation (14 pages), Manuel de démarrage rapide (2 pages), Spécifications (4 pages), Garantie limitée (1 pages), Installation rapide (2 pages), Caractéristiques (2 pages), Manuel d'utilisation (45 pages), Manuel de démarrage rapide (2 pages)

Turning the Unit On or Off

Slide the power switch to ON

The NETWORK STANDBY indicator lights

up in amber and the illumination indicator

lights up in blue.

You can operate this unit when the

NETWORK STANDBY indicator goes off

and the illumination indicator lights up. It may

take a while.

Note

Keep this unit in the network standby mode so it can

be controlled from a controller even when you are

not currently operating this unit. (Refer "To set the

network standby mode".)

To set the network standby

mode

Press ?/1 on the remote.

The NETWORK STANDBY indicator lights

up in amber.

Tip

The unit can be controlled from the controller on

your network, etc., when the unit is in the network

standby mode. The unit turns on automatically when

the controller delivers audio content to this unit.

To resume power from the

network standby mode

Press ?/1 on the remote.

The illumination indicator lights up.

To turn the unit off

Slide the power switch to OFF when you need

to turn the unit off, such as when

disconnecting the AC power cord, etc.

Tip

You cannot operate this unit via a home network

when the power switch is set to OFF but you can

reduce the power consumption.