Sony SHAKE-33 Manuel d'utilisation - Page 40

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony SHAKE-33. Sony SHAKE-33 48 pages. Home audio system

Imprimer la page

Playback does not start from the first

file.

• Set the play mode to Normal Play

(page 18).

Audio file cannot be played back.

• USB devices formatted with file

systems other than FAT16 or FAT32 are

unsupported.*

• A WMA audio file that is the WMA

DRM, WMA Lossless, or WMA PRO

format cannot be played back.

• An AAC audio file that is the AAC

DRM or AAC Lossless format cannot

be played back.

• AAC audio files encoded at 96 kHz

cannot be played back.

• If multiple partitions exist on a USB

device that is being used, files may not

be played back.

• The system can play back to a depth of

8 folders only.

• Files that are encrypted or protected by

passwords cannot be played back.

• Files with DRM (Digital Rights

Management) copyright protection

cannot be played back by this system.

• The MP3 PRO audio file can be played

back as MP3 audio file.

* This system supports FAT16 and FAT32, but

some USB devices may not support all of

these FAT. For details, refer to the operating

instructions of each USB device or contact the

manufacturer.

Tuner

There is severe hum or noise, or

stations cannot be received.

("TUNED" or "ST" flashes in the

display panel.)

• Connect the antenna properly.

• Change the antenna location and its

orientation to obtain good reception.

• Connect a commercially available

external antenna.

• Consult your nearest Sony dealer if the

supplied AM antenna has come off from

the plastic stand.

• Turn off surrounding electrical

equipment.

Bluetooth device

Pairing cannot be performed.

• Move the Bluetooth device closer to the

system.

• Pairing may not be possible if other

Bluetooth devices are present around the

system. In this case, turn off the other

Bluetooth devices.

• Make sure the correct passkey was

entered at the Bluetooth device.

The Bluetooth device cannot detect

this unit, or "BT OFF" appears in the

display panel.

• Set the Bluetooth signal to "BT ON"

(page 28).

Connection is not possible.

• The Bluetooth device you attempted to

connect does not support the A2DP

profile, and cannot be connected with

the system.

• Enable the Bluetooth function of the

Bluetooth device.

• Establish a connection from the

Bluetooth device.

• The pairing registration information has

been erased. Perform the pairing

operation again.

• Erase the pairing registration

information of the Bluetooth device

(page 28) and perform the pairing

operation again (page 26).

The sound skips or fluctuates, or the

connection is lost.

• The system and the Bluetooth device are

too far apart.

• If there are obstacles between the

system and your Bluetooth device,

remove or avoid the obstacles.