Sony SRS-X88 Manuel d'utilisation - Page 23
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony SRS-X88. Sony SRS-X88 28 pages. Personal audio system
Également pour Sony SRS-X88 : Manuel de démarrage (2 pages), Manuel d'utilisation (41 pages), Manuel d'entretien (40 pages), Manuel de démarrage (2 pages)
Flashing stops when any button is tapped.
To receive a stronger signal, try the
following:
Change the direction of the Wi-Fi antenna
(aerial).
Turn off other wireless devices.
To use the BLUETOOTH/Network
standby function
If the BLUETOOTH/Network standby
function is on, the unit turns on
automatically by operating a BLUETOOTH
device or network device, even if the unit is
turned off. The unit will start up more
quickly than usual.
1
Make sure the unit is turned on. Tap and
hold the / (on/standby) button until
it lights up in orange.
The unit turns off and enters the
BLUETOOTH/Network standby mode.
If you operate a BLUETOOTH device or
network device, the unit turns on
automatically and connection starts.
To initialize the unit
Initialize the unit if these measures do not
resolve the problem or if the settings fail.
1
Make sure the unit is turned on. Tap and
hold both the VOL (volume) – button
and / (on/standby) button at the
same time for more than 5 seconds.
The unit will turn off. Settings will return to
their factory defaults, and all BLUETOOTH
pairing information and network settings
will be reset.
Note
If you initialize the unit, the unit may not be able to
connect your iPhone/iPad/iPod or PC. In this case,
erase the pairing information on the iPhone/iPad/
iPod or PC, and then perform the pairing
procedure again.
Refer to Help Guide for symptoms other than
the above.
http://rd1.sony.net/help/speaker/srs-x88/h_zz/
What is BLUETOOTH
wireless technology?
BLUETOOTH wireless technology is a short-
range wireless technology that enables
wireless data communication between
digital devices, such as a computer and
digital camera. BLUETOOTH wireless
technology operates within a range of about
10 m.
Connecting two devices as necessary is
common, but some devices can be
connected to multiple devices at the same
time.
You do not need to use a cable for
connection, nor is it necessary for the
devices to face one another, such is the case
with infrared technology. For example, you
can use such a device in a bag or pocket.
BLUETOOTH standard is an international
standard supported by thousands of
companies all over the world, and employed
by various companies worldwide.
Maximum communication range
Maximum communication range may
shorten under the following conditions.
There is an obstacle such as a person,
metal, or wall between the system and
BLUETOOTH device.
A wireless LAN device is in use near the
system.
A microwave oven is in use near the
system.
A device that generates
electromagnetic radiation is in use near
the system.
Interference from other devices
Because BLUETOOTH devices and wireless
LAN (IEEE802.11b/g/n) use the same
frequency, microwave interference may
occur and resulting in communication speed
deterioration, noise, or invalid connection if
the system is used near a wireless LAN
device. In such a case, perform the
following.
Use the system at least 10 m away from
the wireless LAN device.
23
GB