Sony SS-GSX100 Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony SS-GSX100. Sony SS-GSX100 44 pages. Sony operating instructions mini hi-fi component system mhc-gsx100w, mhc-gsx75

Imprimer la page

Notes

• When you use the main unit inside the effective areas

of the transmitter, the transmitter can be placed in

any direction from the listener.

• Even within the signal reception area, there are some

spots (dead spot) where the RF signal cannot be

received. This is a characteristic inherent to RF

signals, and does not indicate a malfunction. By

slightly moving the transmitter, the location of the

dead spot can be changed.

Notes on receiving performance

This system component utilizes very high

frequency signals in the 900 MHz band so the

receiving performance may deteriorate due to

the surroundings. The following examples

illustrate conditions that may reduce the

possible receiving range or cause interference

with reception.

– Radio waves generated such as cellphones

and cordless phone systems or metal

instruments are placed on the unit.

– Inside a building with walls containing steel

beams.

– Area with many steel file cabinets, etc.

– Area with many electrical appliances capable

of generating electromagnetic noise.

– Transmitter is placed on a metal instrument.

– Area facing roadways.

– Noise or interfering signals exist in the

surroundings due to radio transceivers in

trucks, etc.

– Noise or interfering signals exist in the

surroundings due to wireless communication

systems installed along roadways.

– Transmitter is placed directly on floor.

Placing it up off the floor, such as on a desk,

is recommended.

Listening to audio using

wireless system

(MHC-GSX100W only)

Start playing the connected

component.

Press WIRELESS to switch the

function to WIRELESS.

When the sound is distorted

Move CHANNEL 1–3 on the transmitter to

select a radio frequency.

CHANNEL1:

913.5 MHz

CHANNEL2:

914.0 MHz

CHANNEL3:

914.5 MHz

Press WIRELESS.

"AUTO TUNING" appears.

If you do not hear clear audio, select another

channel using CHANNEL1-3, then press

WIRELESS again.

To finish using WIRELESS

function

Press any function button to select different

function and quit WIRELESS.

Notes

• You may not hear the beginning of the sound from

the main unit until the transmitter starts sending the

RF signals after detecting an audio signal.

• If the transmitter is connected to the headphones jack

of the source component, set the volume of that

component as high as possible without distorting the

audio signal.

• If you hold the antenna of the transmitter with your

hand, noise may occur. However this is not a

malfunction.

• When the transmitter is not to be used for a long

period of time, disconnect the AC power adaptor

from the wall outlet holding the plug. Do not pull on

the cord.

continued