Sony SS-MG110 Manuel d'utilisation - Page 32

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony SS-MG110. Sony SS-MG110 41 pages.

Imprimer la page
Precautions (continued)
Before
placing
a cassette
in the
tape
deck
Take up any slack m the tape. Othetwse
the tape may
get entangled m the parts of the tape deck and become
damaged.
When
using
a tape
longer
than
90
minutes
The tape 1s very elastic. Do not change the tape
opetatlons
such as play, stop, and fast-wmding
frequently.
The tape may get entangled m the tape
deck.
Cleaning
the
tape
heads
Clean the tape heads after every 10 hours of use.
Be sure to clean the tape heads before you start an
Important
recording
or after playmg an old tape. Use
a separately sold dry-type
or wet-type
cleamng
cassette. For details, refer to the mstructlons
of the
cleamng cassette.
Demagnetizing
the
tape
heads
Demagnetwe
the tape heads and the metal parts that
have contact wth the tape every 20 to 30 hours of use
wth a separately
sold demagnetumg
cassette. For
details, refer to the mstructlons
of the demagnetumg
cassette.
If you have any problem usmg this system, use
the following check list.
First,
check that the power cord is connected
firmly and the speakers are connected correctly
and firmly.
Should any problem persist, consult your
nearest
Sony dealer.
General
The display
starts
flashmg
as soon as you plug
m the power
cord even though
you have not
turned
on the system
(See step 6 of "Hookmg
up
the system"
on page 9).
l
Press DISPLAY
twce
when the system LS turned
off. The demonstration
disappears.
The clock
setting/radio
presetting/timer
IS
canceled.
l
The power cord IS disconnected
or a power
failure occurs longer than half a day.
Redo the followmg:
-
"Setimg
the flme" on page 11
-
"Presettmg
radio stations"
on page 18
If you have set the timer, also redo "Wakmg
up
to muuc"
on page 26 and "Timer-recording
radio
programs"
on page 23.
There
IS no sound.
l
Turn VOLUME
clockwse
(or press VOL + on
the remote).
l
The headphones are connected.
l
Insert only the stripped portlon of the speaker
cord mto the SPEAKER
Jack. Insertmg
the vmyl
portIon of the speaker cord will obstruct the
speaker connectIons.
l
There IS no audio output durmg timer recording.
There IS severe
hum or noise.
. A TV or VCR IS placed too close to the stereo
system. Move the stereo system away from the
TV or VCR.
l
Connect the system to a different
wall outlet.
l
Install a ncuse filter (commercially
available) to
the power line.
32