Sony STR-DA80ES - Fm Stereo / Fm-am Receiver Manuel d'utilisation - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony STR-DA80ES - Fm Stereo / Fm-am Receiver. Sony STR-DA80ES - Fm Stereo / Fm-am Receiver 40 pages. Limited warranty (es products)
Également pour Sony STR-DA80ES - Fm Stereo / Fm-am Receiver : Manuel d'utilisation (39 pages), Contexte technique (38 pages), Garantie limitée (1 pages)
Imprimer la page
To change a preset station
Preset a new station on the number you want to
change.
Note
If the AC power cord is disconnected for about one week,
the preset stations will be cleared from the receiver's
memory, and you will have to preset the stations again.
Tuning preset stations (preset tuning)
You can tune directly to a preset station by entering its
preset number. If you don't know which stations are
preset on which numbers, you can tune by scanning
the preset stations.
1
Rotate FUNCTION until the TUNER indicator
lights up.
The last received station is tuned in.
2
Press SHIFT to select a memory page (A, B or C),
then press the numeric button on the remote.
For example, select A and then press 7 to tune in
the station preset as A7.
z
You can tune by scanning the preset stations
Rotate FUNCTION until the TUNER indicator lights up,
and then press DISPLAY so that the frequency display
appears. Then press PRESET TUNING + or – to select
the station you want. Each time you press the buttons,
the preset numbers change as follows:
nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N
nC0˜...C2˜C1N
Receiver Operations
Indexing Preset Stations and
Program Sources
You can enter a name of up to 8 characters for preset
stations (station index) and program sources. These
index names (for example, "VHS") appear in the
receiver's display when a station or program source is
selected.
Note that no more than one name can be entered for
each preset station or program source.
This function is useful for distinguishing components
of the same kind; 2 VCRs, for example, can be specified
as "VHS" and "8MM," respectively. It is also handy for
identifying components connected to jacks meant for
another type of component; for example, a second CD
player connected to the DAT/MD jacks.
Digital processing
control buttons
DISPLAY
POWER
DISPLAY
VIDEO 1
VIDEO 2
VIDEO 3
LD/DVD
TV/DBS
S-VIDEO
VIDEO
L
AUDIO
R
VIDEO 3
{MEMORY}
FM MODE
TUNING
INPUT
–
+
SPEAKERS
A
OFF
B
PRESET TUNING
A
+
B
–
+
SHIFT
FM/AM
PHONES
DPC MODE
1
To index a preset station
Rotate FUNCTION until the TUNER indicator
lights up.
The last station you received is tuned in.
To index a program source
Select the program source (component) to be
named, then go to Step 3.
2
Tune in the preset station you want to create an
index for.
If you are not familiar with how to tune in preset
stations, see "Tuning preset stations (preset
tuning)" on this page.
3
Press DPC MODE repeatedly until the INDEX
indicator lights up.
4
Create an index name by using the digital
processing control buttons as follows:
Press V or v to select a character, and then press b
to move the cursor to the next position.
The index name is stored automatically.
Getting Started
MUTING
MASTER VOL
SUR
PANEL
EQ
UP/DOWN
INDEX
TAPE
DAT/MD
CD
TUNER
PHONO
EQUALIZER
DPC
SET UP
BALANCE
•
MODE
BAND
CH
B
b
0
10
L
R
MODE
FUNCTION
SOUND FIELD
GENRE
MODE
DIRECT
BASS
INPUT
PASS
BOOST
MODE
FUNCTION
(Continued)
17