Cisco ASR 9912 Manuel - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco ASR 9912. Cisco ASR 9912 44 pages. Replacing cisco asr 9000 series router components
Imprimer la page- 1. Field Replaceable Units
- 2. Online Insertion and Removal
- 3. Powering off the Router
- 4. Replacing the Chassis Air Filter
- 5. Required Tools and Equipment
- 6. Removing a Fan Tray
- 7. Installing a Fan Tray
- 8. Disconnecting AC Power
- 9. Reconnecting AC Power
- 10. Disconnecting DC Power
- 11. Reconnecting DC Power
Installing a Version 1 AC or DC Power Module
Figure 12: Removing or Installing a Version 2 AC or DC Power Module from the Cisco ASR 9904 Router
Installing a Version 1 AC or DC Power Module
Follow these steps to install a new version 1 AC or DC power module
Version 1 AC or DC Power Module, on page
Procedure
Step 1
Slide the power module into the bay until it mates with its backplane connector.
Step 2
Pivot the door to the left until the door latch locks.
Caution
Step 3
Verify that the (green) Power Input indicator on the front of the power module goes on. If the indicator does
not light, see
Installing a Version 2 or Version 3 AC or DC Power Module
Follow these steps to install a new version 2 or version 3 AC or DC power module
Installing a Version 2 or Version 3 AC or DC Power Module, on page
Replacing Cisco ASR 9000 Series Router Components
16
To prevent damage to the power tray backplane connector, do not use excessive force when inserting
the power module into the power tray.
Troubleshooting the Power Subsystem
Replacing Cisco ASR 9000 Series Router Components
(Figure 10: Removing or Installing a
15):
.
15):
(Figure 11: Removing or