Cisco ATA 191 Manuel de l'utilisateur - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco ATA 191. Cisco ATA 191 40 pages. Analog telephone adapter
Également pour Cisco ATA 191 : Manuel de l'utilisateur (30 pages), Manuel d'administration (4 pages), Manuel de l'utilisateur (10 pages), Commencer (8 pages), Manuel (10 pages), Manuel de démarrage rapide (13 pages), Manuel de configuration (6 pages), Manuel de l'utilisateur (30 pages)

Imprimer la page
Cisco ATA 191 Manuel de l'utilisateur
Configure Features

Call Forward Settings

You can forward calls from any line on your phone to another phone number. But call forward is phone-line
specific. If a call reaches you on a line where call forwarding is not enabled, the call rings as usual.
There are two ways of forwarding your calls:
• Forward all calls
• Forward calls in special situations, such as when the phone is busy or there is no answer.
Call forward is set up from the Voice tab of the Configuration Utility page. Use the information in the following
table to guide you. Once you have entered your settings, click Save to retain your revisions.
When a call is forwarded, you hear a short ring before the call is forwarded to the new number.
The following table describes the Call Forward settings that you configure from the Voice tab of the
Configuration Utility page.
Table 5: Call Forward Settings
Field Name
Cfwd All Dest
Cfwd No Ans Dest
Cfwd Busy Dest
Cfwd No Ans Delay

Selective Call Forward Settings

You can have a list of up to 8 phone numbers that are forwarded whenever they call you. When someone calls
from one of these numbers, you hear a ring and the call is forwarded to the new number.
When entering Call Forward Selective Caller setting, you can use ? to match any single digit or * to match a
range of digits. For example:
• 1408*—a call is forwarded to the corresponding destination if the phone number starts with 1408
Description
Call Forward All Destination.
Default setting: blank
Call Forward No Answer Destination.
Default setting: blank
Call Forward Busy Destination.
Default setting: blank
Call Forward No Answer Delay.
Default setting: 20
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
Call Forward Settings
Usage Guidelines
Use when you want to forward all of
your incoming calls to another phone
number. Enter the number that will
receive the forwarded call.
Use with Cfwd All Dest when you
want your calls forwarded to a second
person, if your first choice does not
answer.
Use with Cfwd All Dest when you
want your calls forwarded to a second
person, if your first choice is on
another call.
The delay in seconds before Call
Forward No Answer triggers.
15