Cisco Catalyst 2960-XR Manuel d'installation du matériel - Page 25
Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Cisco Catalyst 2960-XR. Cisco Catalyst 2960-XR 34 pages.
Également pour Cisco Catalyst 2960-XR : Manuel de démarrage (25 pages), Manuel du matériel (20 pages)
Imprimer la page
Switch Installation
Step 3
Replace the dust covers when you remove the FlexStack cables from the connectors.
Caution
Removing a FlexStack Cable
Procedure
Step 1
To remove a FlexStack cable, grasp the tab on the cable connector and gently pull straight out.
Step 2
When you remove the FlexStack cables from the connectors, replace the dust covers to protect them from
dust.
Caution
Installing the Power Cord Retainer (Optional)
This section applies only to the Catalyst 2960-X switches.
Note
The power cord retainer is optional (part number [PWR-CLP=]). You can order it when you order your switch,
or you can order it later from your Cisco representative.
OL-28309-02
Removing and installing the FlexStack cable can shorten its useful life. Do not remove and insert
the cable more often than is absolutely necessary.
Removing and installing the FlexStack cable can shorten its useful life. Do not remove and insert
the cable more often than is absolutely necessary.
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
Removing a FlexStack Cable
25