Cisco Catalyst 3030 Manuel de démarrage - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco Catalyst 3030. Cisco Catalyst 3030 34 pages. Cisco systems catalyst blade switch getting started guide
Imprimer la page
Cisco Catalyst Blade Switch 3030 Getting Started Guide
Connecting through the DRAC/MC
Step 1
Step 2
78-17052-01
Follow these steps when connecting through the DRAC/MC:
Connect one end of a DB9 null-modem or crossover cable to the RS-232 console
serial port of the DRAC/MC. Connect the other end of the cable to the RS-232
console serial port of the computer. (See
Figure 5
Connecting through the DRAC/MC
16 x
15 x
12 x
14 x
11 x
13 x
Co ns ol e
16 x
15 x
14 x
13 x
12 x
11 x
CO N
On the PC terminal emulation program:
Set the data format to 8 data bits, 1 stop bit, and no parity.
a.
Set the terminal emulation speed to 115200 baud.
b.
Set Flow Control to none.
c.
Under Properties, select VT100 for Emulation mode.
d.
Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure that the
e.
setting is for Terminal keys (not Windows keys).
When using HyperTerminal with Microsoft Windows 2000, ensure that you have
Windows 2000 Service Pack 2 or later installed. With Windows 2000 Service Pack
2, the arrow keys function properly in the HyperTerminal VT100 emulation. Go
to
www.microsoft.com
Installing the Switch Module in the Server Chassis
Figure
for information on Windows 2000 service packs.
Cisco Catalyst Blade Switch 3030 Getting Started Guide
5.)
1-11