Cisco Catalyst C9300-48UXM Manuel d'installation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco Catalyst C9300-48UXM. Cisco Catalyst C9300-48UXM 16 pages.
Imprimer la page
6
System error: Switch failed to complete local provisioning.
Switch is completely provisioned but unable to connect
7
to Meraki cloud.
8
Firmware download / upgrade in progress
There is a fault with the power supply, fan, or network module
9
(not traffic-related)
10
Switch is fully operational and connected to the Meraki cloud
Back Panel Components
Inactive components: When operating in the Meraki-managed mode, the C9300 will disable the RJ45 console port.
Item
Component
Management Interface (Aux
1
Port)
2
Stack Ports
3
Redundant Fans
4
StackPower Ports
5
Power Supplies
Factory Reset Button
To perform a factory reset, keep the mode button pressed for 20 seconds or more. The switch will reboot and revert to
LED
Description
Status
Connected, used for easy access to the local status
Green
page
N/A
Stack Cables are connected here
Green
Active and operational
N/A
StackPower cables are connected here
Green
Active and functional power supplies
Solid amber
Solid amber
Blinking green
Solid Blue
Blinking amber
Solid green
7