Cisco Cisco ASA Series Pour commencer - Page 10

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} Cisco Cisco ASA Series. Cisco Cisco ASA Series 31 pages.
Également pour Cisco Cisco ASA Series : Monter et connecter (12 pages), Monter et connecter (6 pages)

Imprimer la page

Customize ASDM Access

Note

Related Topics

Factory Default Configurations, on page 16

Enable or Disable Multiple Context Mode

Start ASDM, on page 15

Customize ASDM Access

This procedure applies to all models except the ASA Services Module.

Use this procedure if one or more of the following conditions applies:

• You do not have a factory default configuration

• You want to change the management IP address

• You want to change to transparent firewall mode

• You want to change to multiple context mode

For routed, single mode, for quick and easy ASDM access, we recommend applying the factory default

configuration with the option to set your own management IP address. Use the procedure in this section only

if you have special needs such as setting transparent or multiple context mode, or if you have other configuration

that you need to preserve.

For the ASAv, you can configure transparent mode when you deploy, so this procedure is primarily useful

Note

after you deploy if you need to clear your configuration, for example.

Procedure

Step 1

Access the CLI at the console port.

Step 2

(Optional) Enable transparent firewall mode:

This command clears your configuration.

firewall transparent

CLI Book 1: Cisco ASA Series General Operations CLI Configuration Guide, 9.5

◦ASA appliances—Clients must be on the 192.168.1.0/24 network. The default configuration enables

DHCP so that your management station can be assigned an IP address in this range.

◦ASAv—You set the management client IP address during deployment. The ASAv does not act as

the DHCP server for connected clients.

◦ASA on the Firepower 9300 chassis—All hosts are allowed to access ASDM on the management

interface. The ASAv does not act as the DHCP server for connected clients.

If you change to multiple context mode, you can access ASDM from the admin context using the

network settings above.

Getting Started