Cisco Cisco MDS 9216A - Fabric Switch Manuel de configuration - Page 36

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco Cisco MDS 9216A - Fabric Switch. Cisco Cisco MDS 9216A - Fabric Switch 49 pages. Multilayer fabric switch
Également pour Cisco Cisco MDS 9216A - Fabric Switch : Note de mise à jour (48 pages), Note de mise à jour (44 pages), Note de mise à jour (44 pages), Note de mise à jour (36 pages), Note de mise à jour (26 pages), Note de mise à jour (22 pages), Manuel de référence rapide (14 pages), Note de mise à jour (3 pages), Spécifications (15 pages)

Figure 29 Discovery Dynamic check box

Select the Node Address Persistent check box

Select the Node Address System Assigned check box

Figure 30 Node Address Persistent and Node Address System Assigned check

boxes

Click Apply.

Close the IP iSCSI window.

Select Admin > Save Conﬁguration from the Device Manager menu bar.

Conﬁgure transparent-mode static mapping on both iSCSI-enabled C-Series switches.

Zoning the iSCSI Initiator and Fibre Channel storage WWPNs

The unique WWPN of the iSCSI Initiator acts as a virtual Fibre Channel host available on the Fibre

Channel SAN. The WWPN is zoned with Fibre Channel storage as if it were a Fibre Channel HBA.

Use either the Fabric Manager or the switch CLI to create and modify SAN zones. HP recommends

creating separate iSCSI zones that contain the iSCSI WWPNs and the storage WWPNs that they access.

See the Cisco conﬁguration documentation for information on creating, modifying, or activating SAN

zones.

Figure 31

shows an iSCSI Initiator zoned with an Enterprise Virtual Array storage port.

(Figure

30).

(Figure

30).