Digitone ProSeries 3 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Digitone ProSeries 3. Digitone ProSeries 3 16 pages.

Caller ID Display

Caller ID Display Icons

The "N" on the upper left of the

display is for New calls and the RED LED

flashes until this is reduced to 0. The

telephone handset icon shows the line

is either on-hook or off-hook or if the call

was already answered. The VIP icon

indicates a caller in the VIP List has

called in. To the right is the Time and

Date, then "T" for Total calls currently in

Call History. The Smile icon ☺ is displayed for Invited caller status. Day of week is

shown on the top line. The 24 symbol indicates After Hours Mode is active.

Symbol Blocking - Under the FCC rules for SHAKEN/STIR, Digitone provides relief

from any mishandling of end-to-end call authentication with its own Patented call matrix

system.

Code 03#*

controls all non valid Name parameters presented by scammers.

Newly implemented alert wording [V] presented before the Name has been adopted by

many telephony carriers to indicate the call has been authenticated. So all fake Names

are otherwise blocked with the "Symbol Blocked" displayed after the call record.

Fax or Medical Device - If you also have a Fax machine or even a Medical Alert

device, these devices need to be in parallel with your ProSeries 3 Call Blocker so they

have a direct connection to the phone line. The DPS3 should be used exclusively

for your telephones. You can easily separate the two or three pieces of equipment

with a Duplex (splitter) Jack or setup that device on another wall plate in a separate

room. All blocked calls will not allow the fax machine to receive a fax advertisement.