Digitone ProSeries 3 Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Digitone ProSeries 3. Digitone ProSeries 3 16 pages.

Imprimer la page

Code 21 to view Spoofed Exchange Call list

Code 41 to view Blocked Caller list

Code 44 to view Blocked Names list

Code 51 to view Invited Caller list

Code 53 to view Invited Caller in a Blocked Area Code

Code 61 to view VIP Caller list

For each list, use the Call History button to view up or down. To remove any stored

entry press the Delete Entry button the Display will ask "Confirm Delete?" Press the

Delete Entry button again to confirm. The number or name will then be removed from

that list.

Wildcarding (#)

When using the block or invite commands, you can use the # key to represent all

numbers in a phone number's column. In the phone number ex. 894 555 1212, if you

want to block or invite all numbers (0-9) in a single column you would insert the # key

in that column. Examples: To block all numbers (0-9) in the last column, you would use

40 894 555 121# *. To invite all numbers in the exchange 679 and area code 894, use

50 894 679 *. To block all numbers in the exchange 555 use: 20 555 *.

Blocking Calls

Blocking Unwanted Callers

Code 40

Known unwanted callers are those you enter through programming using Code 40 and

won't be accidentally erased when clearing the memory of blocked numbers. To Block

known unwanted individual callers, press and hold the Program Button for 3 seconds

until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"

displays enter 40 followed by the 10 (or 11) digit number, then the * key. Example for

a Blocked number enter: 40, 894 555 1212 * for 10 digits or 40 1 894 555 1212 for 11

digits. Store up to 700 Core unwanted caller numbers. Note the Block Call List is

revolving and will remove old numbers stored except for these stored numbers.

Blocking Known Unwanted Area Codes

Code 40

To Block specific unwanted area codes, press and hold the Program Button for 3

seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for

"Enter Code" displays, enter 40 to store an area code followed by the * key. Ex. for a

Blocked area code enter: 40, 894*. Area codes are displayed as just the area code.

Deleting Stored Code 40 Blocked Numbers

When attempting to delete stored blocked numbers in programming using Code 41,

"Can Not Delete" will display on numbers stored using Code 40 with the status of NON

AUTO DEL BLK. To change this status to NBR BLOCK LIST, press the

GREEN

Invite

button once. Tap Delete Entry Button once, "Confirm Delete?" will then show. Tap

again to confirm "Item Deleted".

Finding Numbers in Blocked Numbers List

To FIND a number in the large blocked memory storage, use

Code 40 ###

then the

number followed by * to locate that number in the list. EX: 40### then 894 555

1212 *. If the number is found, it will display its location in memory on the LCD screen.

If not, then NBR NOT FOUND will display.