Cisco CWDM-GBIC-1570 Notes d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Notes d'installation pour {nom_de_la_catégorie} Cisco CWDM-GBIC-1570. Cisco CWDM-GBIC-1570 36 pages. Passive optical system
Également pour Cisco CWDM-GBIC-1570 : Manuel d'installation et de spécification (24 pages)
Imprimer la page
Contents
Contents
This installation note contains the following sections:
•
•
•
•
•
•
•
Overview
The Cisco CWDM passive optical system provides optical networking support for high-speed data
communication for metropolitan area networks (MANs) over a grid of eight CWDM optical wavelengths
in both ring configurations or point-to-point configurations.
The Cisco CWDM passive optical system includes these components:
•
•
•
•
CWDM 2-Slot Chassis
The CWDM 2-slot chassis (CWDM-CHASSIS-2) is a standard 19-inch chassis that is one rack unit (RU)
in height. Each CWDM 2-slot chassis can hold two CWDM OADM modules. You can install the CWDM
2-slot chassis in the same equipment rack as your system or in an adjacent rack so that you can connect
the OADMs to the CWDM GBIC transceivers or the CWDM SFP transceivers.
Cisco CWDM Passive Optical System Installation Note
2
Overview, page 2
Safety Overview, page 9
Specifications, page 25
Translated Safety Warnings, page 27
2-slot chassis for Cisco Optical Add/Drop Multiplexers (OADMs)
CWDM OADMs
-
8-channel multiplexer/demultiplexer
Two 4-channel OADMs
-
Eight dual single-channel OADMs
-
1300 nm/1550 nm WDM splitter cable
CWDM GBIC and CWDM SFP transceivers
78-16565-02