Cisco Firepower 1150 Manuel d'installation du matériel - Page 34
Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Cisco Firepower 1150. Cisco Firepower 1150 42 pages.
Également pour Cisco Firepower 1150 : Manuel d'installation du matériel (42 pages), Manuel de déploiement (8 pages), Pour commencer (42 pages)
Imprimer la page
Connect to the Console Port with Microsoft Windows
Figure 25: Console Port Connection
1
USB Mini B console port
3
USB Type A
Step 4
Connect the end of the cable with the DB-9 connector (or USB Type A) to the terminal or PC. If your terminal or PC has
a console port that does not accommodate a DB-9 connector, you must provide an appropriate adapter for that port.
The LED for the console port turns green and within a few moments the Found New Hardware Wizard appears.
Step 5
Follow the instructions to complete the driver installation.
Step 6
To communicate with the chassis, start a terminal emulator application. This software should be configured with the
following parameters:
• 9600 baud
• 8 data bits
• no parity
• 1 stop bit
• no flow control
Cisco Firepower 1100 Series Hardware Installation Guide
30
2
USB Mini B to USB Type A console cable
—
Connect to the Console Port