Cisco GS7000 Manuel d'instructions d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Cisco GS7000. Cisco GS7000 13 pages. Gainmaker node
forward local injection module
Également pour Cisco GS7000 : Manuel d'entretien (15 pages), Dépannage (4 pages), Manuel de dépannage (12 pages)
Imprimer la page
FLI Module Installation
4
Insert the threaded F-type connector on one end of the RF cable assembly
through port F2 and outside the node housing and connect it to the bulkhead RF
connector as shown in the following illustration.
Thread the bulkhead RF connector assembly into port F2 on the node housing lid
5
as shown in the following illustration. Torque the connector from 3 to 4 ft-lbs
(4.1 to 5.4 Nm).
Route the RF cable to the left through the fiber channel in the node and toward
6
the FLI Module.
6
4019330 Rev C