argon audio 6350 Manuel du propriétaire - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} argon audio 6350. argon audio 6350 4 pages.

Imprimer la page

Owner 's manual

Introduction

Thank you for choosing Argon Audio loudspeakers, we hope

they will bring you many years of enjoyment.

Please read this manual fully before unpacking and installing

the product.

Carton contents

We have during production and packing carefully checked and

inspected these loudspeakers.

After unpacking please check for any damage from transport.

We recommend that you keep the original carton box and

packing material for any future shipping.

Loudspeaker installation

The speakers are best used with the tweeters approximately

at ear level when seated. There is a bracket hole on the

back of the 6350. This can be used for mounting the 6350

flat on a wall.

Loudspeaker positioning

Variations in placement of your loudspeakers can produce

dramatic differences in the way music sounds. No listening

rooms are the same and therefore we encourage you to spend

some time experimenting with which placements work best in

your listening room. Trust your ears and be willing to experiment

freely. You can start with our basic recommendations.

Please try to ensure that the rooms surroundings of each

loudspeaker left and right are similar in acoustic character.

For example, if one loudspeaker is placed on bare walls while

the other is placed close to soft furniture's and curtains, both

the overall sound quality and the stereo image are likely to be

compromised.

Because bookshelves are usually located close to the wall,

placement on bookshelves will often provide a richer, more

full-bodied sound. In other words; you will get more Bass.

On the other hand, if you place the speakers free-standing

You will get less Bass but a clearer sound.

w w w . a r g o n a u d i o . c o m

T o begin with, the speakers should be positioned between

1.5 m and 3 m apart at two corners of an equilateral triangle

completed by the listening area at the third corner. See fig. 1

The Argon 6350 is designed to play single-standing, if the room

is not too big.

In bigger rooms a subwoofer will need to be added in order to get

optimal sound.

Home Theatre Systems

Argon 6350 can be used as front channels in a surround

sound home theatre system.

Positioning the front loudspeakers within approximately 1metre

of the sides of your TV will create the best sound image in scale

with the visual image. The loudspeakers' height should ideally

be between the centre and top of the screen.

If Argon 6350 are to be used for reproducing the surround

channels in a multi channel home theatre system, we suggest

you place them as illustrated in Figures 2 to 4 depending on the

number of channels.

Connecting your loudspeakers

We recommend that you read the manual of your amplifier or

av-receiver carefully before connecting your loudspeakers.

Please switch off all equipment when connecting your

loudspeakers.

The binding posts on the terminal accepts wire up to Ø 4mm or

cables with banana plugs.

Make sure that positive terminal binding posts on the speaker

(marked + and colored red) are connected to the positive

output terminal binding posts on the amplifier and that the

negative terminals on the speaker (marked – and colored

black) are connected to the negative output terminal on the

amplifier. See fig 5.

You are now ready to enjoy your Argon 6350 loudspeakers...!

6350